Select your vehicle

Long arm upgrade kits replace short factory-style control arms with longer arms that improve geometry on lifted Jeeps. This branch of the Suspension tree includes tri-link rear kits, radius arm upgrades, boxed and adjustable control arms, flex arms and creeper joints. Brands include TeraFlex, Rubicon Express, Trail Gear and Pro Comp Suspension. Compare each kit’s specifications, then compare the products below.

Showing 1–12 of 45 resultsSorted by popularity

Why go to a long arm setup

When a vehicle is lifted, short control arms swing through a steeper arc and the axle's position changes, which can hurt ride quality, alignment and travel. Longer arms reduce the arm angle at ride height, which usually gives a smoother ride, better articulation and more consistent axle geometry. They are most common on Jeeps with solid axles, such as TJ, ZJ, XJ and JK models.

Kit types in this category

  • Long arm kits: replace the factory lower and upper arms with longer arms and new frame brackets.
  • Tri-link rear kits: rear setups using three links and a Panhard or track bar to locate the axle.
  • Radius arm upgrades: longer front arms that mount on the frame farther back.
  • Flex arms: adjustable arms that improve joint movement and allow pinion and caster adjustment.
  • Boxed arms and creeper joints: stronger arms and large-diameter threaded joints for severe use.

What to compare

Look at arm material, such as chromoly or steel, the diameter and wall thickness, and the bushings or joints used. Rubber and polyurethane bushings ride quietly on pavement, while spherical or Heim-style joints give more articulation but can add noise and need more maintenance. Adjustable arms help you set pinion angle and axle position after changing lift height. Also check whether the kit includes frame brackets, hardware, skid plates and a belly pan for transfer case access, as well as which lift heights it supports.

Fitment and related parts

A long arm kit is often tied to a specific lift range and may need matching springs, shocks, track bar and extended brake lines. Driveshaft angles often change, so some builds also need a different driveshaft or a transfer case drop. Check the exact model, wheelbase and body style, because front and rear systems are usually sold for particular generations.

Installation notes

A long arm kit is a major project that often involves cutting off factory brackets, welding in new mounts and setting geometry accurately. Welded mounts are a structural job, so professional installation is strongly recommended. Tighten all joints with the vehicle at ride height, follow the torque specifications, and have the alignment checked afterward. Lift and suspension modifications can be regulated by state, so verify local rules. Confirm fitment for your exact year, make and model.

Planning the whole suspension

Long arms work best as part of a complete plan. Springs, shocks, track bars, steering and driveline must all suit the new geometry, so decide on the target ride height and tire size first. Consider how the arms will affect ground clearance, since low-hanging brackets and belly pans can catch on rocks. Think about maintenance as well: joints that offer extra movement may need periodic greasing, and bushings can wear. Check that brake lines, wiring and the sway bar have enough length for the added travel. Keep a log of settings such as pinion angle, caster and axle centering, because it helps with troubleshooting later. A professional alignment after the installation, followed by a recheck of fastener torque after the first few trail miles, is a wise habit.

Related guides

Popular Long Arm Upgrade brands

Long Arm Upgrade FAQ

What is the benefit of long arms over short arms?

Long arms lower the arm angle on a lifted vehicle, which usually improves ride quality, articulation and axle geometry. Short arms can work well on moderate lifts, but they become less ideal as the lift gets taller.

Do long arm kits require welding?

Many do, since they need new frame brackets in different locations. Some bolt-on arm upgrades exist for moderate lifts. Read the kit description, and use a professional fabricator if welding is required.

What is a creeper joint?

A creeper joint is a large threaded joint used at the end of a control arm, sized by thread diameter such as 1 inch or 1.25 inches. It allows heavy-duty articulation. Match the thread size and handedness to the arm.

Will a long arm kit change my driveshaft angles?

It can, because axle position and pinion angle shift. Some installations need an adjustable arm, a driveshaft change or a transfer case drop. The kit's instructions and your lift height should guide those decisions.