Overview
The Rubicon Express RE9974 is a driver side rear upper control arm bracket for a custom axle in a Jeep Wrangler TJ, covering the 1997-2006 model years. It ships as bare steel and must be welded in place.
The bracket is laser cut from 3/16-inch cold rolled steel and CNC formed. It is a control arm mount sold as a single bracket, and it accepts any tube diameter.
Key features
- Driver side rear upper position
- Laser cut 3/16-inch cold rolled steel with CNC formed bends
- Bare steel finish for welding
- Sold as a single bracket
- Works with any tube diameter
Setting the upper arm position
The upper control arm position controls the arm’s pivot height and angle, which influences how the axle moves under braking and acceleration. A bracket placed too high or too low can change anti-squat and make the axle wander, so the mounting point should be set with the suspension loaded as it would be on the trail.
Fit the arm and bracket before committing the weld, and mark the final position with the vehicle at ride height. Inspect the bracket after the first few trail sessions for cracks at the weld toe, since upper mounts see strong pulling forces when the axle articulates.
- Set the pivot height with the suspension loaded
- Mark the final position before welding
- Inspect the weld toe after early trail use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9974 |
| UPC | 614901442397 |
| Material | 3/16-inch cold rolled steel |
| Finish | Bare steel |
| Position | Driver side, rear upper |
| Mount type | Control arm mount |
| Quantity | Single |
| Tube diameter | Any |
Vehicle fitment
The bracket is for a custom axle in a TJ Wrangler, covering the 1997-2006 model years, at the driver side rear upper position.
Confirm your vehicle’s year, model and trim before ordering. The bracket is for the rear upper position, not the lower positions.
Installation notes
Weld the bracket to the frame at the upper rear position with the arm set in place, and confirm the arm sits square before the weld is completed.
What’s included
One driver side rear upper control arm bracket.
Not included: the control arm, the custom axle and the mounting hardware.


