Overview
The 16580.16 is a rear yoke for the AMC Model 20 axle. It is a strap and bolt style yoke, sold as the yoke only, and it fits the rear driveshaft at the rear axle on the Jeep CJ5 and CJ7 and the Scrambler.
It is a direct OE replacement built to original specifications. Confirm fit before ordering if you own a Cherokee XJ or Wrangler YJ.
Key features
- Rear yoke for the AMC Model 20 axle
- Strap and bolt style, which holds the yoke with a strap rather than U-bolts
- Sold as the yoke only
- Direct OE replacement built to the original specifications.
Rear yoke and seal care
The rear yoke sits at the end of the driveshaft and turns against the pinion seal, so the sealing surface needs to be smooth and free of grooves. A worn seal usually leaks gear oil onto the axle housing, and a yoke with a worn surface can damage a new seal quickly. Strap and bolt yokes hold the driveshaft with a clamp arrangement, so the fasteners should be tightened evenly and checked after a short drive.
Before fitting, inspect the yoke bore, the threads for the pinion nut and the sealing surface for pitting. Keep the old hardware in mind when selecting new fasteners, and tighten to the torque in the service manual for your axle.
- Check the yoke sealing surface for grooves
- Inspect the pinion seal for hardening
- Recheck strap bolts after the first drive
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16580.16 |
| UPC | 804314044893 |
| Axle type | AMC Model 20 |
| Position | Rear driveshaft at rear axle |
| Axle location | Front and rear |
| Yoke style | Strap and bolt |
| Included | Yoke only |
| Fitment type | Direct fit |
Vehicle fitment
It fits these vehicles with the AMC Model 20 rear axle:
- 1976–1983 Jeep CJ5
- 1976–1986 Jeep CJ7
- 1981–1985 Jeep Scrambler
Confirm fit for Cherokee XJ and Wrangler YJ vehicles before ordering, along with your year, model and trim.
What’s included
One rear yoke, part number 16580.16. The yoke is sold alone.
Not included: Mounting hardware is not part of this package, so have the strap or U-bolt hardware ready.









