Overview
The G2 Axle and Gear 1350 Series pinion yoke, part number 90-2018-35U, is built for the rear of a GM 12 Bolt 8.875 Inch axle and uses U-bolt mounting.
The U-bolt design is what G2 presents as the stronger, preferred style. With no vehicle named, the axle type and the 1350 Series joint are what to check.
Key features
- 1350 Series U-joint yoke with U-bolt mounting
- Rear location for GM 12 Bolt 8.875 Inch axle types
- Chosen by racers and off-road drivers.
- Listed within G2’s pinion flange and yoke range
Rear pinion yoke upkeep
The pinion yoke takes driveshaft torque into the rear gear set, and its flange face is where most wear shows first. A flange with grooves or a loose clamp can leak lubricant past the seal and create driveline vibration. Looking at the yoke every oil change keeps small problems from becoming larger ones.
For GM 12 Bolt axles that see off road use, the driveshaft is more likely to take impact. Inspect the U-joint caps and bearings at the same time as the yoke. Replacing a worn joint with the yoke avoids a second teardown, and it keeps the driveline balanced after the work.
- Look for lubricant around the pinion seal
- Check the flange face for grooves
- Inspect the U-joint caps while the yoke is off
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 90-2018-35U |
| UPC | 631410122961 |
| Yoke style | U-bolt style |
| U-joint series | 1350 Series |
| Axle location | Rear |
| Axle type | GM 12 Bolt 8.875 Inches |
| Listed fitment category | Universal Fit |
Vehicle fitment
No vehicle is named for this yoke. The match points are the GM 12 Bolt 8.875 Inch axle type and the rear location.
Front axles, other GM axle sizes and other joint series are outside these details. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The clamp hardware for U-bolt mounting has to line up with the pinion flange, so check it while the old yoke is off. Bearing preload is restored at reassembly, and a driveline shop with a preload gauge is the usual route.
What’s included
The yoke is the only item this part covers. Check the clamp hardware and pinion nut needs before starting the installation.









