Overview
The 16580.02 is a U-bolt style pinion yoke with 26 splines for Dana 30 front axles. It also covers Dana 35 and AMC 20 axle types and replaces OE 935685 at the front driveshaft.
It fits the 1987–1991 Jeep Cherokee (XJ) and the 1987–1995 Jeep Wrangler (YJ). Confirm fit for your vehicle’s year, model and trim before ordering, especially for earlier CJ5, CJ7 and Scrambler models.
Key features
- U-bolt style yoke, which is held to the pinion with U-bolts
- 26 splines to match the driveshaft
- Front driveshaft at front axle position
- Replaces OE 935685
- It is an OE quality replacement.
Driveshaft and U-bolt fit
A pinion yoke connects the driveshaft to the pinion, and its splines must match the driveshaft exactly to transmit torque without slipping. When the yoke is loose or the splines are worn, the driveshaft can clunk when shifting, vibrate at speed, or show wear marks at the joint. The U-bolts clamp the yoke to the pinion, so they should be seated evenly and tightened to the torque in the service manual.
Before installing, inspect the pinion threads, the seal surface and the U-joint caps. Replacing the yoke often means the U-joint and pinion nut are inspected too, since they share the same load path. Check driveshaft balance after reassembly if you notice vibration.
- Check spline wear before fitting
- Use new U-bolt nuts and torque evenly
- Inspect the U-joint caps for play
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16580.02 |
| UPC | 804314017705 |
| Splines | 26 |
| Yoke style | U-bolt |
| Axle types named | Dana 30 Standard, AMC 20, Dana 30 Reverse, Dana 30 TJ, Dana 35 |
| Position | Front driveshaft at front axle |
| Axle location | Front and rear |
| Replaces | OE 935685 |
| Fitment type | Direct fit |
Vehicle fitment
It fits these vehicles:
- 1987–1991 Jeep Cherokee (XJ)
- 1987–1995 Jeep Wrangler (YJ)
Confirm fit for CJ5, CJ7 and Scrambler models against your vehicle’s year, model and trim before ordering.
Installation notes
The U-bolts are not included, so a separate U-bolt set is needed to fit the yoke.
What’s included
One U-bolt style pinion yoke with 26 splines.
Not included: U-bolts.









