Overview
The 100117-3-KIT is a driveline adapter yoke that bolts a stock Suzuki Samurai driveline to a Toyota axle or transfer case without modifying the drive shaft. It fits the 1986–1995 Suzuki Samurai.
The adapter has both the 1986-89 and the 1990-95 Samurai drive shaft patterns, so one kit covers either pattern. It comes with a dust cover, which is part of the yoke assembly.
Key features
- Bolts a stock Suzuki Samurai driveline to a Toyota axle or transfer case
- No drive shaft modification required
- Covers both the 1986-89 and 1990-95 Samurai drive shaft patterns
- Dust cover included
Adapting a Samurai driveline
A driveline adapter changes the bolt pattern at one end of a shaft so that parts from different vehicles can connect. Before fitting one, check the shaft length and the angle of the joints, since moving the connection point changes driveline angles and can cause vibration at speed. Measure the existing shaft and confirm the yoke and flange types match the new part before cutting or welding anything.
Joints and bearings tend to wear first after a conversion. Inspect U-joints for play, check the dust cover for tears that let grit into the bearing, and look for grease leaks at the seals. Keep the yoke and dust cover clean when greasing, and retighten the pinion bolts after the first few drives. Off-road driving puts extra stress on every connection, so frequent checks help catch small problems early.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 100117-3-KIT |
| UPC | 70000621361 |
| Product type | Driveline adapter yoke with dust cover |
| Drive shaft patterns | 1986-89 and 1990-95 Samurai |
| Connects to | Toyota axle or transfer case |
Vehicle fitment
It fits the 1986–1995 Suzuki Samurai, covering both the 1986-89 and 1990-95 drive shaft patterns.
Other Suzuki models and vehicles other than the Samurai are not covered by this fit. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The driveline adapter yoke with its dust cover, as shown in the title.
