Select your vehicle

Omix-ADA Dana 30 Yoke Kit – 16580.27

Omix-Ada

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana 30 yoke kit for the front driveshaft
  • Fits Dana 30 Reverse and Dana 30 TJ axle types
  • Fits the 1972–1986 Jeep CJ models and the 1981–1985 Scrambler, plus 1997–2006 Wrangler TJ
  • Omix-Ada part number 16580.27, UPC 804314217686

Description

Overview

The Omix-Ada 16580.27 is a Dana 30 yoke kit for the front driveshaft at the front axle. It is made for the Dana 30 Reverse and Dana 30 TJ axle types. It fits Jeep CJ5, CJ6 and CJ7 models, the 1981–1985 Scrambler and the 1997–2006 Wrangler (TJ).

Check the kit contents against your existing yoke before buying, and confirm the axle type on your vehicle.

Key features

  • Yoke kit for the front driveshaft at the front axle
  • Dana 30 Reverse and Dana 30 TJ axle types named
  • Direct OE replacement built to the original specifications.
  • Limited five-year warranty

Yoke kits and driveshaft setup

A yoke sits at the end of the driveshaft and connects to the universal joints, so its condition affects how smoothly the driveline turns. On a Dana 30 front axle, the yoke also works with the axle’s pinion, so a worn or damaged yoke can cause vibration and joint wear. Check the yoke for pitting, cracks and looseness before fitting a kit.

Yoke kits are often installed alongside new universal joints and a fresh pinion seal, since the front driveline is opened for the job. Confirm that the Dana 30 Reverse or Dana 30 TJ axle on your vehicle matches the kit before starting, and keep the pinion nut torque within the vehicle’s service information.

  • Pitting, cracks or looseness on the yoke
  • Worn universal joints
  • Leaking pinion seal
  • Vibration that changes with driveline speed

Specifications

Brand Omix-Ada
Part number 16580.27
UPC 804314217686
Axle types named Dana 30 Reverse, Dana 30 TJ
Position Front driveshaft at front axle
Warranty Five-year limited coverage
Fitment type Direct fit

Vehicle fitment

It fits the following vehicles:

  • 1972–1983 Jeep CJ5
  • 1972–1975 Jeep CJ6
  • 1976–1986 Jeep CJ7
  • 1981–1985 Jeep Scrambler
  • 1997–2006 Jeep Wrangler (TJ)

Cherokee XJ, Wrangler YJ and Wrangler JK are not among the fitting vehicles. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One yoke kit, part number 16580.27. Check the package contents against your installation before starting.

SKU: OAI16580.27 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 15.00 × 9.00 × 5.00 in
brands

Fitment

VehicleYearsTrims
Jeep CJ51972–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ61972–1975Base
Jeep CJ71976–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade
Jeep Scrambler1981–1985Base, Laredo, Renegade, SL, SR
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Omix-Ada 16580.27 fit a 1980 Jeep CJ5?

Yes. It fits the 1972–1983 Jeep CJ5 with a Dana 30 front axle. Confirm the axle type on your CJ5 before ordering.

Which axle types does the 16580.27 yoke kit fit?

Omix-Ada names the Dana 30 Reverse and Dana 30 TJ axle types. The kit is for the front driveshaft at the front axle, so check which Dana 30 version your vehicle has.

Is a warranty included with the 16580.27 yoke kit?

Yes. The kit carries a limited five-year warranty. Confirm the coverage terms with Omix-Ada before ordering so you know what is covered under it.

Do yoke kits need a driveshaft balance check?

A driveshaft that has been opened or had parts replaced should be checked for vibration after installation. Start with a short test drive at low speed, and look for vibration that changes with driveline speed. Any new vibration after the job is worth inspecting before normal use.

Should the universal joints be replaced with a yoke kit?

Often yes, because the joints are opened during the job and wear at the same rate as the yoke. Inspecting the joints for play and dry bearings before reassembly is a sensible step when the driveline is apart.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon