Overview
The G2 Axle and Gear 90-2043NH is a differential pinion flange supplied with no holes, so the bolt pattern is not pre-drilled. It is for a Toyota 8 in. application, and hole layout and material are not identified here.
Drilling and pinion matching
A pinion flange connects the driveshaft to the pinion, so its bolt pattern and center bore must line up exactly. Without pre-drilled holes, the flange is marked against the pinion and drilled to suit, which requires precise measurement. Errors in hole placement can cause vibration or leave the bolts loose under load.
Before drilling, check the pinion’s bore and threads, and confirm the flange face is flat. Use the correct bit and go slowly so the metal does not overheat. After installing the flange, torque the nut to the specified value and recheck it after a short drive, since the nut can settle as the parts seat.
- Mark the pinion before measuring
- Check the flange face for flatness
- Recheck fasteners after the first drive
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 90-2043NH |
| UPC | 70000519696 |
| Application | Toyota 8 in. |
| Holes | None (not pre-drilled) |
| Product type | Differential pinion flange |
Vehicle fitment
No year, model or trim is identified for the 90-2043NH. Match the axle size and pinion before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flange has no holes, so it must be drilled to match your pinion before use. That work needs machining equipment, so a qualified machinist should handle it.
What’s included
Only the flange is included. Quantity and hardware are not identified, so check the package contents before starting.









