Select your vehicle

Showing 25–36 of 57 resultsSorted by popularity

What a pinion yoke does

The pinion yoke bolts to the splined input shaft of the differential and connects the driveshaft's U-joint to the axle. Torque passes from the driveshaft through the yoke into the pinion gear. Its shape and size must match three things: the pinion spline count, the U-joint series and the way the driveshaft attaches.

Matching a yoke

  • **Axle model.** Yokes are listed by axle, such as Dana 30, Dana 35, Dana 44, Dana 60/70, Ford 9-inch, GM 8.5-inch 10-bolt, GM 8.875-inch 12-bolt or Chrysler 8.25. Use the one for your housing.
  • **Spline count.** The number of pinion splines must match. A Dana 44 yoke does not fit a 30 unless the spline count is the same.
  • **U-joint series.** 1310, 1330 and 1350 are common series. The yoke has to match the U-joint cap size and the driveshaft end.
  • **Attachment style.** Strap-and-bolt yokes use a strap that holds the U-joint caps, while U-bolt and flange designs use different hardware. Check what is included, because U-bolt kits and hardware are often sold separately.
  • **Material and strength.** Forged steel yokes handle higher torque than stock cast pieces, and a conversion kit can step up from a 1310 to a 1350 series for stronger driveshafts.

Upgrade and conversion kits

Some kits convert a smaller yoke, such as on a Dana 30 or 35, to a larger U-joint series. This is popular in lifted or larger-tire builds because it allows a stronger driveshaft. Conversion often means changing the driveshaft end too, so check that all parts match.

Installation notes

Pinion yoke replacement affects the pinion bearing preload, so the process matters. Mark the nut and yoke position or count the turns before removal, and use a new crush sleeve or nut if the service manual requires it. A pinion seal is usually replaced at the same time. Torque the pinion nut to specification, check bearing preload with an inch-pound torque wrench, and recheck the driveshaft angles after the change.

Driveline parts are safety related. A failed yoke or loose pinion nut can lead to vibration, loss of power or a locked axle. If you are unsure, have a professional install it. Confirm fitment for your exact year, make, model and axle, and compare to the manufacturer's specifications.

Confirm the parts before disassembly. Count the pinion splines on the old yoke, measure the U-joint cap diameter and the distance between the cap seats, and check the way the driveshaft bolts on. Compare the pinion seal diameter as well, since the yoke seal surface must be smooth and unworn.

Often paired parts are a new pinion seal, a pinion nut or crush sleeve, a U-joint kit, and the U-bolt or strap hardware. Common mistakes include reusing a grooved yoke that will cut a new seal, forgetting to mark the original nut position, tightening the nut past specification and crushing the sleeve, and mixing series sizes. After installation, check the gear oil level and look for leaks. Inspect the yoke periodically for play, which you can check by trying to move it up and down and in and out with the driveshaft removed.

Popular Differential Pinion Yoke brands

Differential Pinion Yoke FAQ

How do I know which pinion yoke I need?

Identify your axle model and pinion spline count, then match the U-joint series and attachment style. Axle tags, casting numbers and the old yoke help. Confirm fitment for your exact year, make and model before ordering.

What is the difference between 1310 and 1350 series?

They describe U-joint sizes. The 1350 series is larger and generally stronger than the 1310. The yoke, U-joint and driveshaft end must all be the same series, so upgrading usually means changing more than the yoke.

Do I need to reset pinion preload when replacing a yoke?

Yes, care is needed. The pinion nut sets bearing preload, and the crush sleeve may need replacing. Follow the service manual, torque the nut to specification and check preload. A professional can do this if you lack tools.

Are U-bolts or straps included with the yoke?

Not always. Some product descriptions say hardware is not included, and U-bolt kits can be listed separately. Read each listing carefully and confirm the correct hardware for the yoke style you buy.