Overview
The Dana Spicer 1330 Series pinion yoke, part number 2-4-7031-1X, is a strap style yoke for Dana 60, Dana 61 and Dana 70 axles. It suits a repair or upgrade where a 1330 Series U-joint needs a new pinion yoke at the front or rear axle.
Used yokes often arrive worn, which is why a new replacement is a common choice. Universal Fit is the category here, but the axle type and joint series decide whether this yoke suits an axle.
Key features
- Strap style yoke for a 1330 Series U-joint
- Lists Dana 60, Dana 61 and Dana 70 axle types
- Suits front and rear axle locations
- Intended for repair or upgrade of a worn pinion yoke
Strap style yoke care
Strap style yokes clamp to the pinion with a strap and bolts rather than U-bolts, so the mounting hardware carries the load differently. Inspect the strap, bolts and pinion threads before removal, since a stretched or cracked strap can loosen under torque. Replacing these parts together helps the driveline stay tight.
Pinion bearing preload is set once the yoke is back on, which is why a driveline shop with the right tools is the practical choice. Tighten the pinion nut in steps and check rotational drag with a torque wrench. A new seal and bearings are often replaced when the yoke is changed.
- Inspect strap and bolts before removal
- Check pinion threads for damage
- Replace seals when the pinion is pulled
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2-4-7031-1X |
| Yoke style | Strap style |
| U-joint series | 1330 Series |
| Axle types | Dana 60, Dana 61, Dana 70 |
| Axle location | Front and rear |
| Listed fitment category | Universal Fit |
Vehicle fitment
No vehicle is named for this yoke. Compatibility rests on the Dana 60, 61 and 70 axle types and the 1330 Series joint.
Axles outside those Dana types and joints other than the 1330 Series are not covered by these details. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Strap hardware on this yoke should be inspected before removal, since the mounting is not U-bolt style. Pinion bearing preload is set once the yoke is back on, so a driveline shop with the right tools is the practical choice.
What’s included
Confirm your vehicle’s year, model and trim before ordering. Check the axle type and joint series against your driveline first.









