RockJock 4X4
Showing 49–78 of 78 resultsSorted by popularity
-
Rod Ends, Heim, Johnny & NG Joints
RockJock 9/16 Inch Greasable Bolt with Hardware – CE-91107
- RockJock 4×4 9/16 inch greasable bolt with hardware, part number R/JCE-91107
- 9/16″ fine thread for 2 1/2″ Johnny Joints
- Zerk fitting installed in the bolt head
- Includes two flat washers and a crush nut
SKU: R/JCE-91107 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 5/8″ Greasable Bolt with Hardware – CE-91108
- RockJock 4×4 greasable bolt with hardware, part number R/JCE-91108
- 5/8 inch fine thread, 4 inch long
- Grade 8 zerk fitted bolt with 2 flat washers and a stover nut
- Used to grease Johnny Joint rod ends, usable in other applications
SKU: R/JCE-91108 -
Steering Gear Box & Components
RockJock 4X4 JL/JT Currectlync Steering System – RJ-442100-101
- Heavy-duty steering system for the Jeep Wrangler JL and Gladiator JT
- 42mm alloy steel tie rod and 1.3 inch forged drag link
- Includes high-mount steering stabilizer relocation bracket kit
SKU: R/JRJ-442100-101 -
-
Lift Kits
RockJock 4 Inch RockJock Lift Kit – CE-9807
- 4-inch RockJock lift for 2007–2018 Jeep Wrangler JK Unlimited four-door models
- Up to 37-inch tires with minor trimming; up to 11 inches of rear travel with recommended shocks
- Eight Johnny Joint adjustable control arms and four lifted coil springs
- Front and rear DOT approved stainless braided extended brake lines
SKU: R/JCE-9807 -
Lift Kits
RockJock 4 Inch Off Road Suspension Lift Kit with Rear Antirock – CE-9807AS
- 4-inch off-road suspension lift with rear Antirock for 2007–2018 Jeep Wrangler JK Unlimited four-door models
- Designed for hard core off-road use with road manners for daily driving
- Lift height range of 4 to 5.5 inches; tire size listed at 40 inches
- Shocks not included
SKU: R/JCE-9807AS -
Lift Kits
RockJock 4 Inch Johnny Joint Suspension Lift Kit with Antirock – CE-9801HL
- 4-inch Johnny Joint suspension lift kit with Antirock for 2004–2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon
- Lift height range of 4 to 5.5 inches
- Coil spring rear and tire fit listed at 37 inches
- Shocks not included
SKU: R/JCE-9801HL -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5″ Narrow Forged Johnny Joint with 7/8″-14 RH Thread (2.625″ x .562″ Ball) – CE-9117N
Rod Ends, Heim, Johnny & NG JointsRockJock 2.5″ Narrow Forged Johnny Joint with 7/8″-14 RH Thread (2.625″ x .562″ Ball) – CE-9117N
- RockJock 4×4 narrow forged Johnny Joint rod end, part number R/JCE-9117N
- 7/8″-14 right hand threaded shank, fully assembled
- 2.625″ wide ball center with 9/16″ thru bolt hole
- Externally greasable through a zerk fitting
- Forged steel with gold zinc plating
SKU: R/JCE-9117N -
-
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Johnny Joint – CE-9114L-14
- RockJock 4×4 R/JCE-9114L-14, forged male rod end Johnny Joint
- Universal fit; no specific vehicle is listed
- 7/16″ thru bolt hole, 2″ mounting width, greaseable and serviceable
- 3/4″-16 threads, 2 1/4″ long on the shank
- Gold zinc plated finish
SKU: R/JCE-9114L-14 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Johnny Joint – CE-9110P-14
- RockJock 4×4 R/JCE-9110P-14, a 2.5-inch weld-on Johnny Joint kit
- 30 degrees of movement in any direction
- DOM tube outer shell with high-density urethane bushings
- 9/16-inch thru bolt hole and 2 5/8-inch mounting width
- No vehicle named; made for fabricated suspension builds
SKU: R/JCE-9110P-14 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114-14
Rod Ends, Heim, Johnny & NG JointsRockJock 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114-14
- RockJock forged Johnny joint, 2.5 inch, 1-1/4 inch right-hand stud
- Greaseable through the outer shell, 7/16 inch thru bolt hole
- Accepts Johnny joint internals; fits RockJock adjustable upper arms
- Gold zinc plated, sold each
SKU: R/JCE-9114-14 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114
Rod Ends, Heim, Johnny & NG JointsRockJock 2.5 Inch Forged Johnny Joint with 1-1/4 Inch RH Threaded Stud – CE-9114
- RockJock 4×4 R/JCE-9114 forged Johnny Joint, fully assembled
- 2.5-inch joint with 1-1/4-inch-12 right hand threaded shank
- 9/16-inch thru bolt hole and 2.625-inch wide ball center
- Externally greasable through a zerk fitting
- Suited to RockJock adjustable lower control arms or universal arm builds
SKU: R/JCE-9114 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2.5 Inch Forged Johnny Joint with 1 Inch RH Threaded Stud – CE-9113
Rod Ends, Heim, Johnny & NG JointsRockJock 2.5 Inch Forged Johnny Joint with 1 Inch RH Threaded Stud – CE-9113
- RockJock 4×4 R/JCE-9113 forged Johnny Joint with a threaded stud
- 2-inch mounting width and 7/16-inch thru bolt hole
- 2-inch mounting width and 7/16-inch thru bolt hole, greaseable through the outer shell and serviceable
- Uses internals from the CE-9112 2-inch Johnny Joint
- No vehicle named; suited to RockJock adjustable upper control arms and universal builds
SKU: R/JCE-9113 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2″ Serviceable Johnny Joint – CE-9112NC-12
- RockJock 4×4 R/JCE-9112NC-12, 2″ narrow forged Johnny Joint rod end
- Universal fit; no specific vehicle is listed
- 1″-14 right hand threads, 5″ long on the shank
- 1/2″ thru bolt hole, 2″ mounting width, greaseable
- Gold zinc plated; non-serviceable
SKU: R/JCE-9112NC-12 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2 Inch Forged Johnny Joint with 3/4 Inch RH Threaded Stud – CE-9112SP
Rod Ends, Heim, Johnny & NG JointsRockJock 2 Inch Forged Johnny Joint with 3/4 Inch RH Threaded Stud – CE-9112SP
- Universal fit 2 inch forged Johnny Joint with a right hand 3/4-16 threaded stud
- Part number R/JCE-9112SP for RockJock adjustable upper control arms and custom builds
- 2 inch mounting width and 7/16-inch thru bolt hole
- Greaseable through the outer shell, finished in gold zinc plating
SKU: R/JCE-9112SP -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2 Inch Forged Johnny Joint with 3/4 Inch LH Threaded Stud – CE-9112SPL
Rod Ends, Heim, Johnny & NG JointsRockJock 2 Inch Forged Johnny Joint with 3/4 Inch LH Threaded Stud – CE-9112SPL
- Universal fit 2 inch forged Johnny Joint for RockJock adjustable upper control arms and custom arm builds
- Part number R/JCE-9112SPL with a left hand 3/4-16 threaded stud
- 2 inch mounting width and 7/16-inch thru bolt hole
- Greaseable through the outer shell, finished in gold zinc plating
SKU: R/JCE-9112SPL -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2 1/2″ Forged Johnny Joint – CE-9114L-21
- RockJock 4×4 forged Johnny Joint rod end, part number R/JCE-9114L-21
- 1 1/4-12 right hand threaded shank for linkage with a 2 1/2 inch joint
- 3.280 inch ball center with a .718 inch thru bolt hole
- Externally greasable through a zerk fitting
- Fully assembled; accepts 9/16 inch greasable thru bolts (sold separately)
- No vehicle fitment listed; check your linkage dimensions before ordering
SKU: R/JCE-9114L-21 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 2 1/2″ Forged Johnny Joint – CE-9114-28
- RockJock 4×4 CE-9114-28 forged Johnny Joint, title size 2 1/2 inch
- 1 1/4 inch -12 right hand threaded shank
- 2.625 inch wide ball center, .640 inch thru bolt hole
- Externally greasable via zerk fitting, gold zinc plated
- Accepts 5/8 inch greasable thru bolts, available separately
SKU: R/JCE-9114-28 -
Rod Ends, Heim, Johnny & NG Joints
RockJock 12mm Greasable Bolt with Hardware – CE-91129
- RockJock 4×4 CE-91129 12mm greasable bolt with hardware
- 12mm thread, 3 3/4 inch (95 mm) long
- Includes grade 8 bolt with zerk fitting, 2 grade 8 flat washers, stover nut
- Used on GM G-body and Ford Fox body upper control arms
- No model years listed
SKU: R/JCE-91129 -
Tubing & Tube Adapters
RockJock 1-1/4 Inch -12 Threaded Bung With Jam Nut – LH Thread – CE-9114BL
- RockJock 4×4 weld-in bung, part number R/JCE-9114BL
- Left hand, 1-1/4 inch – 12 thread
- Hex shaped with a matching machined jam nut
- Designed for tubing with a 1-1/2 inch minimum ID
- Takes forged Johnny Joint or other 1-1/4 inch thread rod ends
SKU: R/JCE-9114BL -
Tubing & Tube Adapters
RockJock 1-1/4 Inch -12 Threaded Bung RH Thread – CE-9114BR
- RockJock 4×4 CE-9114BR 1 1/4 inch -12 right hand threaded bung
- Weld-in design for a tube with 1 1/2 inch minimum inside diameter
- Built for forged Johnny Joint rod ends or any 1 1/4 inch rod end
- Jam nut not included
- Universal fit, with no specific car tied to it
SKU: R/JCE-9114BR -
Tubing & Tube Adapters
RockJock 1-1/4 Inch -12 Threaded Bung LH Thread – CE-9114BLR
- RockJock 4×4 CE-9114BLR 1 1/4 inch -12 left hand threaded bung
- Weld-in design for a tube with 1 1/2 inch minimum inside diameter
- Built for forged Johnny Joint rod ends or any 1 1/4 inch rod end
- Jam nut not included
- Universal fit, with no car named
SKU: R/JCE-9114BLR -
Rod Ends, Heim, Johnny & NG Joints
RockJock 1/2″ Greasable Bolt with Hardware – CE-91128
- RockJock 4×4 CE-91128 1/2 inch greasable bolt with hardware
- 1/2 inch -20 thread, 3 1/2 inch long
- Includes washers and nut
- Built for 2 inch Johnny Joints in TJ, LJ, XJ and MJ applications
- Suits other universal applications as well
SKU: R/JCE-91128 -
-
-
Tubing & Tube Adapters
RockJock 1″ -14 Left Hand Threaded Bung – CE-9113BL1
- RockJock 4×4 CE-9113BL1 weld-in 1 inch -14 left hand threaded bung
- Hex shaped body for easier bar adjustment, not round
- Designed to fit a tube with a 1 1/4 inch inside diameter
- Made for forged Johnny Joint rod ends and other 1 inch -14 rod ends
- Universal fit, with no vehicle named
SKU: R/JCE-9113BL1 -
Tubing & Tube Adapters
RockJock 1 Inch -14 Threaded Bung With Jam Nut – RH Thread – CE-9113B
- RockJock 4×4 weld-in bung, part number R/JCE-9113B
- Right hand, 1 inch – 14 thread
- Hex body with a matching machined jam nut
- Designed for tubing with a 1-1/4 inch minimum ID
- Takes Johnny Joint or other 1 inch thread rod ends
SKU: R/JCE-9113B -
Tubing & Tube Adapters
RockJock 1 Inch -14 Threaded Bung With Jam Nut – LH Thread – CE-9113BL
- RockJock 4×4 weld-in bung, part number R/JCE-9113BL
- Left hand, 1 inch – 14 thread
- Hex shaped with a matching machined jam nut
- Designed for tubing with a 1-1/4 inch minimum ID
- Takes Johnny Joint or other 1 inch thread rod ends
SKU: R/JCE-9113BL -
Jam Nuts
RockJock 1 Inch -14 LH Jam Nut – CE-9113LJN
- RockJock 4×4 CE-9113LJN, 1 inch -14 left hand thread jam nut
- Thread size 1 inch -14, left hand thread direction
- Designed for CE-9113L Johnny Joints with treaded shanks
- Silver zinc plated finish, one jam nut per unit
- Universal fit, not tied to a specific vehicle
SKU: R/JCE-9113LJN























