Overview
The RockJock 4×4 CE-91108 is a 5/8 inch greasable bolt with hardware, part number R/JCE-91108, made for greasing Johnny Joint rod ends. It is a grade 8 bolt with a zerk fitting, and it comes with two flat washers and a stover nut. The bolt measures 5/8 inch fine thread by 4 inches long.
The bolt is used to grease RockJock Johnny Joint rod ends, and it can also be used in other applications. Match its 5/8 inch fine thread and 4 inch length against your parts.
Key features
- Grade 8 bolt with a zerk fitting installed
- 5/8 inch fine thread
- 4 inch length
- Two flat washers and a stover nut included
- Used to grease Johnny Joint rod ends, and usable in other applications
Greasing a bolted joint
A grade 8 bolt carries more load than a standard-grade fastener, which suits joints that see shock. Grade alone does not guarantee suitability, though. Match the bolt to the hole and bracket, and avoid mixing hardware from different sources in one joint without checking the fit.
The stover nut has a locking insert, so it resists loosening from vibration when it is run down onto the threads. Use the nut and washers as supplied, placing a flat washer between the nut and any soft or slotted surface. Tighten evenly and check that the bolt turns freely through the joint before final assembly.
Grease the joint through the zerk once everything is tight. Wipe the fitting clean first and pump until fresh grease shows at the seal. Check the zerk and bolt head after trail use, since a damaged fitting stops grease from reaching the joint.
- Match thread and length before assembly
- Use flat washers against soft surfaces
- Grease once the assembly is tight
- Replace a bent or damaged zerk
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-91108 |
| Thread | 5/8 inch fine |
| Length | 4 inch |
| Bolt grade | Grade 8 |
| Lubrication | Zerk fitting |
| Hardware included | 2 flat washers, 1 stover nut |
Vehicle fitment
This bolt is universal fit and is not tied to one vehicle. Whether it suits depends on the thread and length your joint and bracket need.
Check the 5/8 inch thread and 4 inch length against your joint before installing.
Installation notes
The two flat washers and the stover nut come with the bolt. Grease the joint through the zerk once the assembly is complete.
What’s included
One grade 8 zerk fitted bolt, two flat washers and one stover nut.









