Overview
The RockJock 4×4 Currectlync heavy-duty steering system RJ-442100-101 is a bolt-on steering kit for the Jeep Wrangler JL and Gladiator JT. RockJock says big tires and aggressive use can bend or break the factory steering components.
The kit has an alloy steel tie rod 42mm (1.65 inch) in diameter and a solid forged steel drag link 1.3 inches in diameter. It also has greasable forged tie rod ends, premium jam nuts and adjusters, and a black paint finish. Both the tie rod and drag link have double adjusters, so they can be adjusted without removal.
The system is painted black, so it is ready to install out of the box. It is designed for both stock height and lifted vehicles.
The system is made so the Jeep does not get left with bent or broken factory steering parts on the trail.
Key features
- Alloy steel tie rod, 42mm (1.65 inch) diameter
- Solid forged steel drag link, 1.3 inch diameter
- Larger, greasable forged tie rod ends
- Double adjusters on the tie rod and drag link
- High-mount steering stabilizer relocation bracket included
- Painted black
- Compatible with ram assist steering
Steering geometry after install
Replacing a tie rod and drag link changes the toe setting and the position of the steering wheel, so an alignment is advisable once the kit is in place. Toe is set by the length of the tie rod, and the steering wheel should sit centered when the wheels point straight ahead. A shop that can set the alignment for the tire size and ride height will get the most consistent steering.
Bump steer and steering feel can also change when the stabilizer is relocated. After the first drive, check that the stabilizer moves freely, that the bracket bolts are tight and that the tie rod ends have no play. Grease the forged tie rod ends at the interval your use requires, and recheck the jam nuts after rough trail runs.
- Alignment after install
- Check stabilizer movement and bracket bolts
- Grease tie rod ends regularly
- Recheck jam nuts after rough trail use
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JRJ-442100-101 |
| Tie rod | Alloy steel, 42mm (1.65 inch) diameter |
| Drag link | Solid forged steel, 1.3 inch diameter |
| Tie rod ends | Forged, greasable |
| Finish | Black paint |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator (JT) and the 2018–2026 Jeep Wrangler (JL), including 4xe and Rubicon 392 versions.
The Wrangler JK is not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is fully bolt-on and needs no modification or machining of the vehicle. It relocates the factory stabilizer: the passenger-side mount moves from the tie rod to the axle housing, and the other end moves from the axle housing to the tie rod tube.
What’s included
The tie rod, drag link, forged tie rod ends, jam nuts and adjusters, the JL/JT high-mount steering stabilizer relocation bracket kit for the passenger side, and a heavy-duty stabilizer shock mounting kit for the opposite end.









