Overview
The RockJock CE-9801HL is a 4-inch Johnny Joint suspension lift kit with Antirock for the 2004 to 2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon. The kit is designed to provide a lift height range of 4 to 5.5 inches and to work with a tire size of 37 inches. It is built around RockJock suspension parts intended for off-road use.
Coil springs provide the rear lift, and shocks are not part of the kit. The component list and installation steps are not covered here, so check the parts received against part number CE-9801HL before starting.
Key features
- 4-inch lift, with a 4 to 5.5 inch lift height range
- Johnny Joint suspension design
- Antirock system
- Coil spring rear lift
- Tire size listed at 37 inches
Choosing a lift height
Lift height is the main decision when adding a Johnny Joint style suspension. A higher lift opens room for larger tires but increases the forces on steering, axle and driveline parts. Consider how much clearance the vehicle really needs before choosing the upper end of the range, and remember that a taller setup changes the road feel as well.
Rear coil springs with separate shocks mean the ride height depends on both parts working together. Replacing old shocks at the same time as the springs keeps the suspension balanced, and worn bushings or steering components are easier to replace while everything is apart. Inspect track bar and control arm bushings during the job.
- Match shock length to the new ride height
- Inspect steering linkage for play after install
- Check brake lines for stretch at full travel
- Re-torque fasteners after the first highway drive
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9801HL, also written CE-9801HL |
| Lift height range | 4 to 5.5 inches |
| Rear lift method | Coil springs |
| Tire size | 37 inches |
| Shocks | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2004 to 2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon models.
This kit’s fit covers 2004 through 2006 Wrangler models. Verify the year, model and trim on your vehicle before purchase.
Installation notes
A 4-inch lift changes suspension geometry, so a wheel alignment and a driveline angle check should follow installation.
What’s included
Check the parts received against part number CE-9801HL before installing.
Not included: Shocks are not included, so they need to be sourced separately.








