Overview
The RockJock 4×4 CE-9113BL1 is a custom machined, weld-in threaded bung with a 1 inch -14 left hand thread. It is made for forged Johnny Joint rod ends and for any other 1 inch -14 thread rod end. Its hex shape, rather than a round body, makes bar adjustment easier.
The bung is designed to fit into a tube with a 1 1/4 inch inside diameter. Part number R/JCE-9113BL1 identifies this model.
Key features
- Custom machined weld-in design
- Hex shape for easier bar adjustment
- Left hand thread, 1 inch -14
- Made for forged Johnny Joint rod ends and other 1 inch -14 rod ends
Weld-in bung considerations
A weld-in bung turns a tube into a threaded mounting point, which lets a rod end be adjusted and locked in place. Because the bung takes the load of the rod end, its position in the tube and the quality of the weld matter as much as the thread. Measure the tube and mark the bung position before cutting or welding, so the rod end can reach its full range.
Keep the bung threads clean and free of weld spatter before fitting a rod end. Spatter can damage threads and make the adjustment hard to set. After installation, check that the bung is square to the tube and that the rod end turns freely through its full travel.
- Mark the bung position before cutting the tube
- Clear weld spatter from the threads
- Check that the rod end turns freely after fitting
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9113BL1 |
| Thread size | 1 inch -14 |
| Thread direction | Left hand |
| Body shape | Hex, not round |
| Tube inside diameter | 1 1/4 inch |
| Fitment | Universal fit |
Vehicle fitment
It is a universal part, not tied to one make, model or year. Check that the rod end thread matches before welding. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a weld-in part, so it is welded into the tube rather than bolted on. Get the weld done by a qualified welder, since the bung carries load through the rod end.
What’s included
One weld-in bung.
Not included: the rod end, which threads into the bung.








