Overview
The RockJock 4×4 CE-9114L-19 is a 2.5 inch forged Johnny Joint rod end with a 1-1/4″-12 left hand threaded shank. Johnny Joints are used as heavy-duty flexible joints on suspension links; this unit is finished in gold zinc plating.
The joint comes fully assembled with standard Johnny Joint internals, a 2.585 inch wide ball center, and a .640 inch thru bolt hole. It is serviceable and greaseable through a zerk fitting.
It is a universal fit with no vehicle application. Check the package contents against your installation before starting.
Key features
- Forged steel construction
- 1-1/4″-12 left hand threaded shank
- Comes fully assembled with standard Johnny Joint internals
- Externally greaseable through a zerk fitting
- Gold zinc plated finish
- Serviceable design
Left hand thread considerations
A left hand thread is used when the two ends of a tube link need to be adjusted in the same rotational direction. Before assembly, confirm the thread direction against the mating part, the link tube and the other end of the joint. A mismatch can leave the joint unable to adjust correctly, and it can also cause the jam nut to back off under load.
Because the joint is serviceable, it can be disassembled and regreased when needed. Keep the threads clean, use a grease that suits the joint and check the zerk fitting for damage. After installation, check for binding through the full range of motion and recheck the jam nut after the first drives.
- Confirm thread direction against the mating part
- Keep threads clean before assembly
- Grease through the zerk after assembly
- Recheck the jam nut after first drives
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | CE-9114L-19 |
| Joint type | Johnny Joint rod end, finished joint |
| Size | 2.5 inch |
| Construction | Forged steel |
| Thread | 1-1/4″-12, left hand |
| Ball center width | 2.585 inch |
| Thru bolt hole | .640 inch |
| Finish | Gold zinc plating |
| Maintenance | Serviceable, zerk fitting |
| Distributor part number | R/JCE-9114L-19 |
| Fit type listed | Universal fit |
Vehicle fitment
It is a universal fit with no vehicle application. Check the link or control arm design and thread size against your build before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, brake, steering and axle parts affect how the vehicle drives and stops, so professional installation is recommended.
Torque all fasteners to the correct values for your build, and support the vehicle on jack stands.
Re-check fasteners after the first miles of driving, have the alignment checked after any suspension work, and confirm that brake lines, hoses and driveshafts have enough clearance.
Check local regulations on vehicle height and lift before changing the ride height.
What’s included
One forged Johnny Joint rod end, fully assembled with standard Johnny Joint internals.
Not included: Confirm the jam nut need before starting; they may need to be bought separately.









