Overview
The RockJock 4×4 R/JCE-9114L-14 is a forged male rod end Johnny Joint with 3/4-inch-16 threads on the shank, built for suspension arms and custom fabrication. The mounting width is 2 inches, so check that dimension against your bracket before fitting.
The forging uses the same internals as the CE-9112 2-inch Johnny Joints. It has a 7/16-inch thru bolt hole, is greaseable through the outer shell, and has a gold zinc plated finish. It can be used in any RockJock adjustable upper control arm, as well as in universal builds where custom arms are made.
Key features
- Forged male rod end style with a 2″ mounting width
- Accepts Johnny Joint internals from RockJock CE-9112 2″ joints
- 2 1/4″ of 3/4″-16 threads on the shank
- 7/16″ thru bolt hole
- Greaseable through the outer shell
- Serviceable.
- Gold zinc plated finish
Thread hand and adjuster fit
The thread hand on a joint decides which way the stud must turn to tighten into the arm, so it needs to match the adjuster before any assembly. Mixing hands can cause a stud to back out or strip. Before ordering a threaded joint, confirm the arm uses the same hand, and test-fit the stud by hand to make sure it starts smoothly.
Once the hand is confirmed, thread length matters too. The stud should be fully engaged in the arm, with enough thread left to accept the jam nut and lock the setting. Thru bolts sized to the hole keep the housing properly mounted. After assembly, tighten the joint to a snug fit, cycle it through full travel, and check that the stud does not move under load.
- Confirm thread hand before ordering
- Engage the stud fully in the arm
- Recheck the jam nut after the first drives
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9114L-14 |
| Type | Forged male rod end |
| Joint details | Finished joint |
| Mounting width | 2″ |
| Thru bolt hole | 7/16″ |
| Shank thread | 3/4″-16, 2 1/4″ long |
| Lubrication | Greaseable through the outer shell |
| Finish | Gold zinc plating |
| Maintenance | Serviceable |
| Unit | Each |
Vehicle fitment
It is a universal fit joint with no specific year, make, model or trim. It is aimed at custom arms and builds, and it can be used in RockJock adjustable upper control arms. Match the 2-inch width and 3/4-inch-16 threads to your arm for a proper fit.
Because no vehicle is named, do not assume it matches your arm or bracket. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Units accept RockJock’s 7/16-inch greaseable thru bolts, which are sold separately. Jam nuts are also available for these units. Grease the joint through the outer shell after installation, and check that it moves freely through its full range before loading the arm.
What’s included
One forged Johnny Joint in gold zinc plating. The thru bolts and jam nuts are not part of the package.
Not included: 7/16″ greaseable thru bolts and jam nuts, both available from RockJock as separate parts.









