Overview
The RockJock 4×4 CE-91129 is a 12mm greasable bolt, 3 3/4 inch (95 mm) long, with a zerk fitting for grease. It is used in GM G-body and Ford Fox body upper control arm applications.
Check the model year and control arm design of your car before ordering, since fit depends on those details.
Key features
- Grade 8 bolt
- Zerk fitting installed in the head for greasing
- 12mm thread
- 3 3/4 inch (95 mm) length
Upper control arm bolts
An upper control arm bolt carries the arm’s load as the suspension moves, so it is under constant shear and tension. Over time, bushings wear and the bolt can loosen or bind. A greasable bolt helps the pivot stay lubricated, which reduces friction and noise. Pick a bolt that matches the arm’s bore and bushing sleeve, since a mismatch can make the arm bind.
When installing, tighten the nut to the arm’s specified torque and recheck after the first drive. Inspect the bolt for stretching, thread damage or corrosion around the head. Replace a bolt that shows any of these signs, because a failed upper control arm pivot can change alignment quickly. Keep the grease fitting clean, and use only grease suited to suspension pivots.
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-91129 |
| Thread size | 12mm |
| Length | 3 3/4 inch (95 mm) |
| Bolt grade | Grade 8 |
| Lubrication | Zerk fitting installed in head |
| Washers | 2 grade 8 flat washers |
| Nut | Stover nut |
| Fitment | It is designed for GM G-body and Ford Fox body upper control arms. |
Vehicle fitment
The bolt is made for GM G-body and Ford Fox body upper control arm applications. Compare the bolt length and thread with your existing arm before fitting.
Verify your car’s year and control arm design before fitting, and check the bolt length against your installation.
What’s included
One greasable bolt with a grade 8 zerk fitting installed in the head, two grade 8 flat washers and one stover nut.









