Overview
The RockJock CE-9807 is a 4-inch lift kit for 2007 to 2018 Jeep Wrangler JK models, sold as a complete package of RockJock suspension parts. It allows clearance for tires up to 37 inches tall with minor trimming. It covers the four-door Unlimited 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions. The tire size is 40 inches.
With the recommended shocks, the kit allows up to 11 inches of rear wheel travel and 9 1/2 inches of front wheel travel. Up to 11 inches of front travel is possible with specific shocks and some minor trimming. The kit includes eight Johnny Joint adjustable control arms, four lifted coil springs and a dropped pitman arm, plus bump stop and relocation hardware. Shocks are not included.
Key features
- Clearance for up to 37-inch tires with minor trimming
- Up to 11 inches of rear wheel travel with the recommended shocks
- 9 1/2 inches of front wheel travel with the recommended shocks
- Eight Johnny Joint adjustable control arms
- Four lifted coil springs
- Front and rear DOT approved stainless braided extended brake lines
- Heim jointed adjustable sway bar links front and rear
- Dropped pitman arm
Clearance and trimming
Running larger tires on a lifted JK is mostly a matter of clearance at full lock and full compression. Tires near the upper end of the range may need minor trimming at the fender lip or the inner liner to avoid rubbing, and the amount depends on wheel offset and backspacing. Test the steering through full lock and through a full drop of the suspension before driving the truck on the road.
A lift with many control arms, relocated track bars and a dropped pitman arm changes the steering and suspension angles, so alignment and steering checks should follow installation. Extended brake lines need the right length for full travel. Check the fender liners, sway bar links and track bar bushings after the first few trips, since they carry more load on a raised vehicle.
- Test steering at full lock with the final tire size
- Check brake lines for stretch at full droop
- Inspect track bar bushings for wear
- Keep the fender liner clear of the new tire path
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9807 |
| Lift height range | 4 to 5.5 inches |
| Front wheel travel | 9 1/2 inches with recommended shocks |
| Rear wheel travel | Up to 11 inches with recommended shocks |
| Tire clearance | Up to 37 inches with minor trimming |
| Tire size listed | 40 inches |
| Shocks | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Covers 2007 to 2018 Jeep Wrangler JK Unlimited four-door models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions.
Two-door JK models are not covered. Confirm fit for your vehicle’s body style, model and trim before ordering.
Installation notes
The eight control arms, the coil springs and the relocated track bars change the suspension geometry, so a wheel alignment and a driveline angle check belong after installation. The extended brake lines should be checked for length once the lift is in.
What’s included
The kit includes eight Johnny Joint adjustable control arms, four lifted coil springs, a front urethane bump stop kit, rear bump stop spacers, a rear coil spring retaining kit, front and rear DOT approved stainless braided extended brake line kits, front and rear track bar relocation kits, relocation kits for the tops of the front shocks and the bottoms of the rear shocks, front and rear heim jointed sway bar links, and a dropped pitman arm.
Not included: Shocks are not included.








