Overview
The RockJock 4×4 CE-9114LJN is a 1 1/4 inch -12 jam nut for treaded-shank RockJock CE-9114 Johnny Joints. It also works in any other application that needs a 1 1/4 inch jam nut.
Part number R/JCE-9114LJN identifies this left hand version in the RockJock jam nut range.
Key features
- Silver zinc plated finish
- Designed for RockJock CE-9114 Johnny Joints with treaded shanks
- Usable in any application that needs a 1 1/4 inch jam nut
- Left hand thread direction
Choosing and setting a jam nut
A jam nut locks a threaded rod end at the length you set, so it keeps the joint from backing out under load. Before buying one, look at the thread size, pitch and direction, then compare them with the rod end or bung it will tighten against. A nut that cross-threads or sits crooked will not hold the setting, so start it by hand and make sure it turns freely before tightening.
Once the rod end is at the right length, hold it with a wrench and snug the jam nut against the housing. Check the threads for burrs or flattened crests, because damage there can let the nut loosen over time. Replace a nut that spins loose, shows thread wear, or has cracks around the bore. Re-check the setting after the first few trail runs, since new joints and nuts often settle slightly.
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9114LJN |
| Thread size | 1 1/4 inch -12 |
| Thread direction | Left hand |
| Finish | Silver zinc plated |
| Unit | Each |
| Fitment | Universal fit |
Vehicle fitment
This is a universal fit part, and no particular car is named for it. Check the thread direction against your joint before use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the thread direction against your joint before fitting, since a left hand jam nut must match the joint’s thread exactly.
What’s included
One jam nut, one unit each.
