Overview
The RockJock 4×4 R/JCE-9112NC-12 is a 2-inch narrow forged Johnny Joint, a male rod end with 1-14 right hand threads on the shank. It is made for suspension fabrication and custom builds, and it can be used as a replacement part or in universal applications. The joint was first designed for the JK front and rear track bars.
The joint is a male rod end style forging that accepts Johnny Joint internals made for this narrow joint. It has a 1/2-inch thru bolt hole and a 2-inch mounting width, and it is greaseable through the outer shell. The finished joint carries gold zinc plating. Matching jam nuts, part number CE-9113JN, are available for locking the joint once it is set.
Key features
- Forged male rod end style joint with a 2″ mounting width
- Accepts Johnny Joint internals designed for this narrow joint
- 5″ of 1″-14 right hand threads on the shank
- 1/2″ thru bolt hole for a through-bolt mount
- Greaseable through the outer shell
- Gold zinc plated finish
- Non-serviceable, so it is replaced rather than rebuilt.
Replacement or custom build choices
A non-serviceable joint is a sealed part that gets replaced when it wears out, so plan the arm design around that. Builders often keep a spare joint on hand for trail repairs, since a worn unit can usually be swapped quickly if the arm mounts and threads are right. Choose the joint size and thread first, then build the arm around its mounting width and bolt hole.
Consider the loads the arm will see. Narrow joints suit tighter spaces, but the arm must still give the stud a solid mounting point with the thread fully engaged. Jam nuts help lock the setting, and the thru bolt should be sized to the hole and kept snug. Inspect the joint after each season of hard use, looking for play, rough movement, or cracks in the housing around the stud.
- Keep a spare joint for trail repairs
- Check thread engagement before loading
- Replace joints that show play or cracks
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9112NC-12 |
| Joint details | Finished joint |
| Type | Forged, male rod end style |
| Mounting width | 2″ |
| Thru bolt hole | 1/2″ |
| Shank thread | 1″-14, 5″ long |
| Thread direction | Right hand |
| Lubrication | Greaseable through the outer shell |
| Finish | Gold zinc plating |
| Maintenance | Non-serviceable |
Vehicle fitment
Universal fit, with no specific year, make, model or trim. The joint is intended for custom suspension builds and replacement use. Match the 2-inch mounting width, 1/2-inch bolt hole and 1-14 thread to your own arm or bracket. Its original design came from the JK front and rear track bars.
No vehicle is covered by name, so confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
This joint is non-serviceable, so plan to replace it rather than rebuild it. The 1/2-inch thru bolt hole takes a through bolt, and the 5-inch thread length leaves room for a jam nut and the arm. Check full range of movement against the arm before loading the suspension.
What’s included
A single forged Johnny Joint with gold zinc plating. Jam nuts are not part of the package.
Not included: jam nuts, which RockJock lists separately under part number CE-9113JN.









