Overview
The RockJock 4×4 CE-9114-14 is a 2.5 inch forged Johnny joint with a 1-1/4 inch right-hand threaded stud, sold each. It is a male rod-end style forging that accepts the internals of RockJock’s 2 inch Johnny joints.
The joint has a 7/16 inch thru bolt hole and a 2 inch mounting width, and it is greaseable through the outer shell. It is a universal fit for RockJock adjustable upper control arms and for custom arms built by the builder.
A Johnny joint is a rod-end style joint that lets a control arm move in more than one direction while keeping its position. Adjustable joints like this one let the builder set arm length, and RockJock keeps the jam nuts for these units on hand.
Key features
- Forged male rod-end style body
- Greaseable through the outer shell
- 7/16 inch thru bolt hole
- 2 inch mounting width
- 2 1/4 inches of 3/4-16 right-hand threads on the shank
- Accepts 7/16 inch greaseable thru bolts, sold separately
- Gold zinc plating
Building a custom arm
A Johnny joint lets a control arm pivot in more than one direction while holding its position, which is why it is used at the ends of adjustable links. In a custom arm, the joint should sit square to the mounting points, with the stud threaded far enough into the sleeve that the jam nut seats fully. Measure the arm length before final assembly so the geometry lines up with the axle and frame mounts.
Once the arm is assembled, grease the joint through the outer shell until fresh grease appears, then check for play by hand. Recheck the jam nut and the thru bolt after the first trail runs, since shock loads settle the parts. Keeping a spare jam nut and a small supply of grease on hand makes future service simpler.
- Square the joint to the mounting points
- Engage enough stud thread before locking the jam nut
- Grease after assembly
- Recheck jam nut and thru bolt after first runs
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | CE-9114-14 |
| Type | Forged Johnny joint, finished joint |
| Size | 2.5 inch |
| Stud | 1-1/4 inch right-hand, 3/4-16 threads |
| Thread length | 2 1/4 inches |
| Thru bolt hole | 7/16 inch |
| Mounting width | 2 inch |
| Maintenance | Serviceable; greaseable through the outer shell |
| Finish | Gold zinc plating |
| Fitment | Universal fit label; no vehicle named |
Vehicle fitment
It is a universal fit for RockJock adjustable upper control arms and for custom arms built with a universal application. Fit depends on the arm and stud length rather than on a vehicle.
The fit depends on the arm and the stud length, not on a vehicle, so confirm the stud and bolt hole sizes against the arm you are building or replacing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the threaded stud to the length the arm requires, then lock it with the jam nut. The joint is greaseable through the outer shell, so grease it after assembly.
What’s included
One forged Johnny joint with a 1-1/4 inch right-hand stud, sold each. Not included: the 7/16 inch greaseable thru bolts, which RockJock sells separately.









