Overview
The RockJock 1 Inch -14 Threaded Bung With Jam Nut in right hand thread (part number R/JCE-9113B) is a weld-in bung for a 1 inch -14 rod end. It works with forged Johnny Joint rod ends and any other 1 inch thread rod end, so it suits custom adjustable bars and links.
The hex body is shaped for easy turning when adjusting bar length. A custom machined jam nut of the same hex size is included to lock the setting. The bung is designed for tubing with a 1 1/4 inch inside diameter.
Key features
- Hex body for quick bar adjustment
- Right hand thread
- Custom machined jam nut included
- Weld-in design for tubing
- Accepts forged Johnny Joint or other 1 inch thread rod ends
Setting up a weld-in adjuster
A weld-in bung gives a threaded rod end a fixed home inside a tube, so the rod end can be turned in or out to change the length of a bar. Before welding, plan where the bung sits so the rod end can still reach its mounting point through its full travel. Tube wall thickness and weld quality both affect how well the joint holds under load, so the work should be done by someone comfortable with steel fabrication.
Threaded adjusters like this are often replaced together with the rod ends they carry. Worn or loose threads, cracked welds, and bent tubing are the usual signs that a bar needs attention. After the first few trail runs, check the jam nut for tightness and look over the weld toes for hairline cracks, then re-check the setting any time the length changes.
- Mark the bar length before cutting or welding
- Clean threads of weld spatter before fitting
- Check the jam nut after every adjustment
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JCE-9113B |
| Thread size | 1 inch – 14 |
| Thread direction | Right hand |
| Minimum tube ID | 1-1/4 inches |
| Shape | Hex |
| Jam nut | Included |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit bung, so it is not built for one vehicle. Its suitability depends on the bar it is welded into, so confirm the thread and tube diameter match your build before welding.
Installation notes
Because this is a weld-in part, it is fixed to the tube by welding. The 1 1/4 inch inside diameter is the tube size it is designed for, so measure your tubing first.
What’s included
The bung and a custom machined jam nut are included.
Not included: The rod end that threads into the bung.








