Eaton has 31 parts in the Slickrock 4X4 catalog, most of them in Differential Parts (15), Differentials (11), Ring and Pinion Installation Kits (5) and Dana 44 Lockers and Spools (1). Eaton part numbers look like "14020-010" and "14023-010"; each product title ends with its part number, and searching for one opens the product. Pick your vehicle at the top of the page to narrow the list to what fits.
Eaton
Showing all 31 resultsSorted by popularity
-
-
Differentials
Eaton Toyota 7.5″ IFS ELocker4 Locking Differential – 14220-1
- Electronic ELocker4 selectable locker for a Toyota 7.5-inch IFS front axle (part number 14220-1)
- Four pinion gear design for strength and capability
- Engages in 0.14 seconds
- Universal fit by axle type; no vehicle listed
SKU: EAT14220-1 -
-
-
Differentials
Eaton Detroit TrueTrac Dana 44 3.73 Down Front Differential – 913A591
- Eaton Detroit TrueTrac limited slip assembly, part EAT913A591
- Front axle location, Dana 44 axle type, 30 splines
- 3.73 Down gear ratio.
- All gear driven, clutchless design.
- Fitment is by axle type; no vehicle is named
SKU: EAT913A591 -
Differentials
Eaton Detroit TrueTrac AAM Ram 9.5 Inch Front Differential – 914A643
- Clutchless limited slip differential for a front axle with 33 splines (part number 914A643)
- All gear driven, with no clutches to wear out.
- Automatically moves power to the wheel with grip
- Title and attribute table disagree on the axle size
SKU: EAT914A643 -
Differentials
Eaton Detroit Locker GM 8.5 Inch/8.6 Inch 10 Bolt 30 Spline Automatic Locker – 187C148A
DifferentialsEaton Detroit Locker GM 8.5 Inch/8.6 Inch 10 Bolt 30 Spline Automatic Locker – 187C148A
- Automatic locker for GM 10-bolt 8.5 and 8.6 inch axles with 30 splines (part number 187C148A)
- Keeps both wheels driving, lets wheel speeds differ when needed
- Front or rear axle location listed
- Fitment not listed by vehicle
SKU: EAT187C148A -
-
Ring and Pinion Installation Kits
Eaton Dana 44 Front/Rear Master Install Kit – K-D44-FR
- Eaton master install kit with bearings for Dana 44 axles
- Front or rear axle location
- Covers differential installs and ring and pinion replacement
- Part number EATK-D44-FR
- Fitment is by axle type, not by a specific vehicle
SKU: EATK-D44-FR -
Differentials
Eaton Dana 44 30 Spline 3.92 Up E-Locker – 19969-010
- Eaton ELocker4 electronic selectable locker, part EAT19969-010
- Dana 44 axle type with 30 splines, front or rear location
- Switches from open to 100-percent locked and back
- Four pinion gear design.
- Fitment is by axle type; no vehicle is named
SKU: EAT19969-010 -
-
Differentials
Eaton Dana 35 E-Locker4 Locking Differential – 14244-1
- Electronic selectable locker for a Dana 35 rear axle with 29 splines (part number 14244-1)
- Flip a dash switch to go from open to fully locked and back
- Net-forged gears for added strength.
- Fitment not listed by year or model
SKU: EAT14244-1 -
Differentials
Eaton Dana 30 27 Spline 3.73 Up E-Locker – 19818-020
- Electronic selectable locker for a front Dana 30 axle with 27 splines (part number 19818-020)
- Push-button operation, open to locked
- Needs 12 volt power only, with no air lines or cables
- Universal fit for Dana 30 standard front axles by type
SKU: EAT19818-020 -
Dana 44 Lockers and Spools
Eaton Dana 44 30 Spline 3.73 Down 4 Pinion E-Locker – 19977-010
- Eaton E-Locker part 19977-010, an electronic push-button selectable locker
- Built for Dana 44 axles with 30 splines, rear or front location
- Switches from open to spool with a button press, no air lines or cables
- Runs on 12 volt power
- No vehicle years or models are listed
SKU: EAT19977-010 -
-
Differential Parts
Eaton Ford 8.8 Inch 31 Spline E-Locker – 19660-010
- Eaton 19660-010 electronic push-button selectable rear differential locker
- Built for Ford 8.8 inch rear axles with 31 splines
- Switches from open to spool with a button, with no air lines or cables
- Runs on 12 Volt power
SKU: EAT19660-010 -
-
Differential Parts
Eaton GM 8.875 Inch 12 Bolt Truck 2.76-342 Limited Slip – 19587-010
- Eaton 19587-010 limited slip differential for GM 12 Bolt 8.875 inch rear axles
- 30 spline axle shaft fitment, with Posi preload springs and carbon fiber clutches
- Rebuildable design, UPC 70000213978
SKU: EAT19587-010 -
-
-
Differential Parts
Eaton Dana 60 35 Spline 4.56 Up E-Locker – 14023-010
- Eaton Dana 60 selectable locker, 35 spline, 4.56 up ratio
- Electronic push-button selection on 12 Volt power
- Front and rear axle location, part number 14023-010
- No vehicle named; confirm axle spline and ratio before ordering
SKU: EAT14023-010 -
Differential Parts
Eaton Dana 60 30 Spline 4.10 Down E-Locker – 14020-010
- Eaton Dana 60 selectable locker, 30 spline, 4.10 down ratio
- Electronic push-button operation on 12 Volt power
- Front and rear axle location, part number 14020-010
- No vehicle named; check axle specs before ordering
SKU: EAT14020-010





















