Overview
The Eaton Ford 8.8 Inch 28 Spline Limited Slip, part number 19605-010, is a limited slip differential assembly for Ford 8.8 inch axles. It is also built for Mazda 8.8 inch axles, in either a rear or front axle location.
The design uses preload springs with carbon fiber clutches, and the assembly is rebuildable. It is a 28 spline unit, so check the spline count of your axle before buying.
Key features
- Limited slip assembly for Ford and Mazda 8.8 inch axles
- 28 splines
- Preload springs
- Carbon fiber clutches
- Rebuildable design
Setup and axle matching
A limited slip assembly changes how torque reaches each wheel, which helps on loose or uneven ground by keeping both wheels driving. Carbon fiber clutches grip differently from older friction materials, so the break-in and fluid choice matter. Use the fluid type your axle requires for limited slip service.
Installing this type of unit involves more than bolting it in. Ring and pinion contact, carrier bearing preload and backlash all affect noise and life, so the setup should be checked after installation. Inspect the carrier bearings and axle seals whenever the cover is off.
If the old unit is worn, look for chatter in turns, uneven wheel spin or a clunk when shifting direction. Replacing the axle shafts or seals at the same time can make sense if they show wear, since a new assembly will not fix those parts.
- Use limited slip fluid
- Check backlash after setup
- Inspect seals when the cover is removed
Specifications
| Brand | Eaton |
|---|---|
| Part number | 19605-010 |
| Axle manufacturer | Ford |
| Axle type | Ford 8.8 inch, Mazda 8.8 inch |
| Axle location | Rear or front |
| Axle spline | 28 splines |
| Differential type | Limited slip assembly |
| Clutches | Carbon fiber |
| Fitment label | Universal fit |
Vehicle fitment
No vehicle years or models are tied to this assembly. The Ford 8.8 and Mazda 8.8 names identify the axle housings it fits, so match the axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Carrier bearing preload and ring and pinion setup are part of installing a limited slip assembly, so have it fitted by a professional who works on axles.
What’s included
Confirm whether a ring gear, pinion or carrier bearings are needed for your axle setup before installing.










