Select your vehicle

Eaton GM 10.5 Inch 14 Bolt 4.56 Up Limited Slip – 19610-010

Eaton

Shop Eaton Differentials on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Eaton limited slip for GM 14 bolt 10.5 inch rear axles, part 19610-010
  • 30 splines for 4.56 Up gear ratios
  • Carbon fiber clutches and preload springs
  • Rebuildable design

Description

Overview

The Eaton GM 10.5 Inch 14 Bolt 4.56 Up Limited Slip, part number 19610-010, is a limited slip differential for the rear of GM 14 bolt 10.5 inch axles. It has 30 splines and is marked for 4.56 Up gear ratios.

Eaton uses preload springs and carbon fiber clutches in this unit, and it can be rebuilt. It suits a GM 14 bolt rear housing when you want a limited slip carrier in place of an open one.

Key features

  • 30 splines for GM 14 bolt axles
  • Rear axle location
  • Preload springs
  • Carbon fiber clutches
  • Rebuildable design

Gear ratio and carrier choice

Choosing a limited slip carrier starts with the gear ratio. A 4.56 Up ratio means the carrier has to match the ring and pinion you run, and mixing ratios with the wrong carrier leads to noise and early wear. Measure or confirm your current ratio before buying, and keep a note of the axle code stamped on the housing for reference when comparing units.

Because a carrier swap touches the ring and pinion, expect to set the mesh and bearing preload again. Check that the housing bore and bearing seats are clean and undamaged, and replace worn axle bearings or seals while the axle is apart. A carrier that chatters or whines after installation usually points back to gear setup rather than to the clutch pack.

Specifications

Brand Eaton
Part number 19610-010
Axle manufacturer GM
Axle type GM 14 bolt 10.5 inches
Axle location Rear
Axle spline 30 splines
Differential type Limited slip assembly
Gear ratio marking 4.56 Up
Fitment label Universal fit

Vehicle fitment

The GM 14 bolt 10.5 inch name identifies the axle this carrier fits. Confirm the housing and gear ratio match your rear axle before ordering.

Confirm fit for your vehicle’s year, model and axle code before ordering.

Installation notes

Gear setup and bearing preload are part of installing this carrier, so an axle shop should handle the fitting.

What’s included

Check the package contents before ordering, including whether a ring gear, pinion or axle shafts come with the carrier.

Questions & Answers

Does the Eaton 19610-010 fit my GM 14 bolt?

The assembly is named for GM 14 bolt 10.5 inch rear axles with 30 splines and 4.56 Up gear ratios. No vehicle years or models are listed, so match the axle type and ratio to your housing before ordering.

What spline count is the Eaton GM 10.5 limited slip?

It has 30 splines. It is a limited slip assembly with preload springs and carbon fiber clutches, and it can be rebuilt.

What is the Eaton 19610-010 part number?

The part number is 19610-010 and the brand is Eaton. Use this number to match the carrier when you compare it with other GM 14 bolt limited slip units.

Is the GM 14 bolt 10.5 inch unit a universal fit?

Fit is set by the axle type, GM 14 bolt 10.5 inches. Check the housing and gear ratio on your rear axle before ordering.

Can a limited slip carrier be swapped into a GM 14 bolt housing?

It is a carrier-level part, so the swap usually means checking the housing, gear ratio and spline count together. Confirm those details against your existing axle before buying, and plan on setting the gear mesh again.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Eaton Differentials on Amazon