Overview
The Eaton EATK-D44-FR is a master install kit with bearings for Dana 44 axles, usable at the front or rear axle location. It gathers the components needed to install an Eaton differential or replace a ring and pinion in one kit. Eaton describes premium bearings and components that support long life and quiet operation.
Key features
- Master kit with bearings for Dana 44 axles
- Front or rear axle location
- Brings together the parts needed for a differential install or ring and pinion replacement
- Bearings and components are designed for long life and quiet operation.
Preparing for a rebuild
A master kit is most useful when the axle is opened for work. Before starting, clean the housing thoroughly, remove old seals and inspect the bearing bores for scoring or wear. Damage found at this stage can change which parts need replacing, so check before the new components go in.
Gear set setup depends on pinion depth, carrier shims and preload, which are measured and adjusted during assembly. Keep removed shims and bearing races together, and use fresh gasket material and the correct fluid for the axle. Careful work at this stage helps the new parts run quietly and last.
- Clean the housing and mating surfaces
- Inspect bearing bores for scoring
- Replace seals and gaskets at the same time
- Record shim positions as you remove them
Specifications
| Brand | Eaton |
|---|---|
| Part number | EATK-D44-FR |
| Kit type | Master install kit with bearings |
| Axle manufacturer | Dana |
| Axle type | Dana 44 |
| Axle location | Front or rear |
Vehicle fitment
Fitment is by axle, not by vehicle. This kit is for Dana 44 axles, and no specific year, make, model or trim is stated.
Confirm that your axle is a Dana 44 before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Ring and pinion replacement depends on gear mesh and bearing preload, so a qualified differential technician should set up the install.
What’s included
A master install kit with bearings for Dana 44 axles.
Not included: Confirm the gear set, differential case and axle housing against your rebuild plan before ordering.








