Overview
The Eaton 19512-010 is a limited slip differential for the rear of GM 12 bolt truck axles at 8.875 inches, with 30 splines. It fits gear ratios of 3.73 and up and uses the Eaton Posi design.
A limited slip differential sends more drive to the wheel with grip by using clutches and springs, rather than the open action of a standard differential. This unit suits street use and can be rebuilt, with preload springs and carbon fiber clutches. It is a limited slip, not a locker, so the wheels are not forced to turn together.
Key features
- Preload springs
- Carbon fiber clutches
- Rebuildable design
- GM 12 bolt 8.875 inch truck rear axle application with 30 splines
- Limited slip assembly type
Care for the clutch pack
A limited slip relies on its clutch pack to control how far the wheels can spin apart, so clutch condition shapes how the axle feels. Over time the clutches wear, and a worn pack can chatter in tight turns or grab unevenly, which is often the first sign the unit needs service. Fluid that is not suited to limited slip use can cause the same symptoms, so use the lubricant the carrier needs.
Gearing and tire size also affect how the unit works. Changing tire diameter changes the load on the carrier, and a larger tire puts more stress on the gears and clutches. When a limited slip is rebuilt, inspect the spring pack and the pinion bearings at the same time.
- Check clutch wear if the axle chatters in turns
- Use lubricant suited to limited slip use
- Inspect preload springs during any rebuild
- Replace worn pinion bearings during the carrier job
Specifications
| Brand | Eaton |
|---|---|
| Part number | 19512-010 |
| UPC | 70000537615 |
| Axle manufacturer | GM |
| Axle location | Rear |
| Axle type | GM 12 bolt 8.875 inches |
| Axle spline count | 30 splines |
| Gear ratio range | 3.73 and up |
| Clutch type | Carbon fiber |
| Springs | Preload springs |
| Differential type | Limited slip assembly |
Vehicle fitment
Fitment is set by axle, not by vehicle year range. It matches the GM 12 bolt truck axle at 8.875 inches with 30 splines and 3.73 and up gearing. Measure the axle size and count the splines before installation.
Other GM 12 bolt housings or spline counts are outside this match. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing a limited slip means setting carrier preload and gear backlash, and checking the clutch setup against the axle service specifications. A gear shop is a sensible choice for the work. Because the clutches are carbon fiber and rebuildable, confirm their condition during the job. Support the axle securely throughout.
What’s included
The limited slip differential, part number 19512-010, is the item. Check the package contents for carrier, ring gear and hardware before starting.










