Overview
The Eaton Dana 35 E-Locker4 Locking Differential, part number 14244-1, is an electronic selectable locker for the rear of a Dana 35 axle with 29 splines. It gives drivers traction on demand.
A flip of the dash switch takes the differential from open to 100 percent locked, and a second flip returns it to normal driving. The E-Locker uses net-forged gears for added strength. The JL in the axle type names the axle family, so axle size and spline count are the match points.
Key features
- Electronic selectable locking differential
- Open to 100 percent locked at the flip of a dash switch
- Second flip returns the unit to normal open driving
- Net-forged gears add strength.
- Rear axle location
Before wiring an electronic locker
An electronic selectable locker changes how the axle shares torque. With the locker open, the wheels turn at different speeds, which suits pavement and tight turns. When it locks, both axle shafts turn together, which helps when one tire loses grip in mud, loose dirt or ice. Since it can be switched off, most drivers keep it open on the street and engage it only when traction is needed.
Before buying, measure the housing and count the axle splines, since those decide whether a Dana 35 unit goes in your axle. Gear ratio and the rest of the drivetrain also matter. A differential swap often calls for a new gasket, seals and fresh gear oil, so plan for them now. Route the switch wire away from heat and moving parts, and check that the connector is sealed against water.
- Confirm axle size and spline count
- Plan for gasket, seals and gear oil
- Route the wire away from heat
Specifications
| Brand | Eaton |
|---|---|
| Part number | EAT14244-1 |
| Popular axle manufacturer | Dana |
| Axle location | Rear |
| Axle type | Dana 35 JL |
| Differential case design | Dana 35 |
| Axle spline | 29 splines |
| Differential type | Selectable locker |
Vehicle fitment
Fit depends on the axle, not a vehicle name. It suits a Dana 35 axle with 29 splines. Check the Dana 35 axle size and spline count against your housing before ordering. Confirm fit for your vehicle’s year, model and trim before ordering.
Check the Dana 35 axle size and spline count against your housing before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The E-Locker is electronic and wires to a dash switch rather than running on air or cable. Plan the wiring harness and switch as part of the installation.
What’s included
The locker unit itself. Check the package contents against your installation before starting.









