Overview
The Eaton Dana 35 Rear Master Install Kit, part number EATK-D35-R, is a master kit with bearings aimed at Dana 35 rear axles. It collects the parts for an Eaton differential install or a ring and pinion swap into one box.
The bearings and components are designed for long life and quiet running.
Key features
- Master kit with bearings
- Made for Dana 35 rear axles
- Single-box kit for differential install or ring and pinion swap
- Premium bearings and components.
Rear axle setup notes
The rear axle carrier holds the ring gear and pinion, and the pinion depth sets how the teeth mesh. Changing a gear set or bearing usually requires re-checking depth, preload and backlash before the housing is closed, because a small error can cause noise or early wear. Shops with a setup stand and gauges handle this step more reliably than a driveway install.
Before starting, drain the fluid, clean the housing and remove any metal debris from the case. Inspect the axle seals and the pinion seal surface, since a leak at either point can contaminate the new bearings. Use fresh gear oil at the level the vehicle requires, and keep a break-in period in mind after the install.
- Clean the carrier and drain old fluid
- Inspect axle and pinion seals
- Check pinion depth and preload before closing
Specifications
| Brand | Eaton |
|---|---|
| Part number | EATK-D35-R |
| Axle manufacturer | Dana |
| Axle type | Dana 35 |
| Axle location | Rear |
| Kit type | Master kit with bearings |
| Fitment type | Universal fit. |
Vehicle fitment
Fitment isn’t tied to a named vehicle. The stated match is a Dana 35 rear axle, so confirm your rear axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear axle work with new bearings usually requires pinion depth and preload adjustments, so a shop with setup experience is the realistic route for this kit.
What’s included
A master kit with bearings and components for a differential install or ring and pinion swap. Check the parts on hand against your installation before starting.








