Overview
The Eaton 19660-010 is an electronic, push-button selectable rear differential locker for Ford 8.8 inch axles with 31 splines. It moves from open to spool with a button press, so the driver can lock the axle when grip is needed and return it to open for normal driving.
Because there are no air lines to leak and no cables to snag on obstacles, this locker avoids the hoses and cable routing that come with air or cable-actuated lockers. The only electrical requirement stated is 12 Volt power.
Key features
- Electronic push-button selection between open and spool modes
- No air lines to leak and no cables to get hung up on
- Runs on 12 Volt power
- Selectable locker design for the rear Ford 8.8 inch axle
- Matched to a 31-spline axle
Living with a spool locker
A spool locker makes both wheels turn together, which is useful when one tire has no grip, but it changes how the truck handles on pavement. Drivers often notice a hop or tire scrub in tight turns when the locker is engaged, so the open setting is the right choice for everyday driving. Switching back to open once the obstacle is cleared keeps the driveline and tires working normally.
Because the locker sits inside the rear axle, the carrier, pinion bearings and axle shafts are part of the same system. Heavy use of a locked axle puts extra load through those parts, so inspect them after hard use. Tire size changes can also affect how the locker feels, since larger tires add stress to the driveline.
- Keep the open setting for pavement
- Inspect axle shafts after locked use
- Check carrier bearings for play
- Watch tire wear after tire size changes
Specifications
| Brand | Eaton |
|---|---|
| Part number | 19660-010 |
| UPC | 1966001000 |
| Locker type | Electronic, push-button selectable |
| Axle manufacturer | Ford |
| Axle type | Ford 8.8 inches |
| Axle location | Rear |
| Axle spline count | 31 splines |
| Operating voltage | 12 Volt |
Vehicle fitment
The locker is matched to a Ford 8.8 inch rear axle with 31 splines. Check the axle type and spline count against your rear axle before ordering.
This is a single-axle locker made for one axle type and spline count, so it is not a general-purpose part. Make sure the year, model and trim suit your truck before buying.
Installation notes
Confirm the axle type and 31-spline count match your rear axle before purchase, since the locker is made for that combination.
What’s included
Hardware, wiring and ring gear come separately, so inventory your installation parts before starting.









