Overview
The Eaton Elocker service kit, part number 26663-00S, is a service kit for Eaton Elocker differential lockers. It is intended for various Dana 30 and Dana 35 vehicles, and the kit includes a stator assembly, armature and retaining bracket.
Make sure your vehicle’s year, model and trim match the kit before you order it.
Key features
- Service kit for the Eaton Elocker differential
- Includes stator assembly and armature
- Includes retaining bracket
- It is intended for various Dana 30 and Dana 35 vehicles.
Signs the locker needs service
An Elocker is an electrically actuated differential locker, so service problems often show up as an axle that fails to lock or unlock when the switch is engaged. Before opening the housing, check the wiring, fuse and switch, since a fault there can look like a worn internal part. Electrical symptoms are easier to confirm on the bench than on the trail.
When the internal stator or armature is worn, the locker may engage slowly, engage intermittently, or fail to hold under load. Metal shavings in the gear oil or a burnt smell from the carrier are reasons to pull the cover and inspect. Service work is usually paired with fresh gear oil and a careful check of the ring and pinion, because reopening the carrier is the costly part of the job.
- Intermittent engagement or slow lock-up
- Metal particles on the cover magnet or in drained oil
- Wiring or switch faults that persist after testing
Specifications
| Brand | Eaton |
|---|---|
| Part number | 26663-00S |
| UPC | 70000537617 |
| Axle compatibility | Dana 30 and Dana 35 |
| Included parts | Stator assembly, armature, retaining bracket |
Vehicle fitment
It is intended for various Dana 30 and Dana 35 axles, so check the axle type first. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Locker service involves opening the differential, so a qualified drivetrain shop is the usual choice for installation.
What’s included
Stator assembly, armature and retaining bracket.
Not included: The differential case, gears and bearings are not part of this kit.







