Overview
The Eaton K-D44-JK is a rear master differential install kit for the Dana 44 JK axle. It brings together the bearings and components needed to install an Eaton differential or replace the ring and pinion in one box.
The bearings and components are premium parts, offered for long life and quiet operation. The kit lets you upgrade a differential more easily because the parts it needs are packed together.
Key features
- Master kit with bearings for a Dana 44 JK rear differential
- Covers the components needed to install an Eaton differential
- Covers the components needed to replace the ring and pinion
- Premium bearings and components.
Identifying a Dana 44 housing
Before buying a master kit, confirm the housing really is a Dana 44. Look for an axle tag or stamped code on the housing, and compare the cover bolt pattern and axle tube size with the axle you have. Many Jeep axles look similar from the outside, so a physical check is worth the time. A mismatch between housing and gear set is one of the more costly mistakes in a differential job.
Once the housing is confirmed, plan the rest of the job. Replacing the ring and pinion usually means checking the carrier bearings, pinion bearings and the differential cover gasket at the same time. Clean the housing thoroughly, use the gear oil the axle requires, and keep the fill plug and cover bolts tightened to the values your service information gives.
- Check the housing tag and cover pattern
- Inspect bearings and cover gasket
- Use the gear oil your axle requires
Specifications
| Brand | Eaton |
|---|---|
| Part number | K-D44-JK |
| Axle type | Dana 44 JK |
| Axle location | Rear |
| Kit type | Master kit with bearings |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), in two-door and four-door models including the Unlimited. The 2018–2022 Wrangler JL is not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Only the JK is listed. Check that the rear axle is a Dana 44 JK before ordering.
Installation notes
Confirm the rear housing is a Dana 44 JK before starting, since the kit is made for that axle only. A differential install should be carried out by someone experienced with gear setup.
What’s included
A master kit with bearings and the components for an Eaton differential install or a ring and pinion replacement. Check the package contents against your installation before starting.









