Performance Axle Components
Showing 25–36 of 669 resultsSorted by popularity
-
Differential Guards
Rancho Rear Dana 44 Glide Plate – RS62117
- Rear Dana 44 glide plate for the Jeep Wrangler JL and related models (part number RS62117)
- Mounts to the rear axle casting, with no cutting or drilling
- 1/4 inch high-strength, low-alloy steel with red powder coat
- Works with OE and most aftermarket differential covers
SKU: RANRS62117 -
Differential Guards
Rancho Front Dana 44 Glide Plate – RS62116
- Front Dana 44 glide plate for the Jeep Wrangler JL (part number RS62116)
- Mounts to the front axle casting, with no cutting or drilling
- 1/4 inch high-strength, low-alloy steel with red powder coat
- Works with OE and most aftermarket differential covers
- Smoother glide over obstacles, forwards and backwards
SKU: RANRS62116 -
Differentials
Power Trax GM 8.5/8.6 Inch 30 Spline 2.73 Carrier and Up Grip LS Traction System – LS201030
DifferentialsPower Trax GM 8.5/8.6 Inch 30 Spline 2.73 Carrier and Up Grip LS Traction System – LS201030
- Fits GM 8.5-inch and 8.6-inch 10-bolt axles
- Limited-slip assembly with 30 axle splines
- Lists Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon and Escalade
- Carbon-fiber and steel friction plates
- Part number PTXLS201030
SKU: PTXLS201030 -
Differentials
Power Trax Ford 9 Inch 28 Or 31 Spline No Couplers Lock Right Locker – 1810-LR
- Automatic Lock Right locker that replaces the differential case
- Ford 9-inch rear axle, 28 or 31 spline axles
- Ring and pinion setup is not altered.
- Installs in the front, rear or both axles
- Part number PTX1810-LR
SKU: PTX1810-LR -
Differentials
Power Trax Ford 8.8 Inch 31 Spline Grip LS Traction System – LS108831
- Fits Ford F-150 (1983–2014), Explorer (1991–2010), Bronco (1983–1996) and Econoline vans
- Limited-slip assembly for the Ford 8.8-inch rear axle, 31 splines
- Carbon-fiber and steel friction plates in a fully machined case
- Comes fully assembled and can be rebuilt
- Part number PTXLS108831 with 10 ring gear bolts
SKU: PTXLS108831 -
Differentials
Power Trax Ford 8.8 Inch 31 Spline .875 Cross Pin Trac-Loc Case No-Slip – 9206883128
- Power Trax No-Slip Trac-Loc unit for a rear Ford 8.8-inch axle (part number 9206883128)
- Combines limited slip smoothness with locking traction
- Synchronized locking, no ratcheting sounds.
- Confirm the axle’s spline count before ordering.
SKU: PTX9206883128 -
Differentials
Power Trax Ford 8.8 Inch 28 Spline .750 Cross Pin Open Case No-Slip – 9206882807
- Power Trax No-Slip automatic locker for a Ford 8.8-inch axle with 28 splines (part number 9206882807)
- Synchronized locking with no ratcheting sounds.
- No ring and pinion setup required
- No special tools or oils needed
SKU: PTX9206882807 -
Differentials
Power Trax Dana 60 4.56 Carrier and Up 35 Spline Grip LOK Traction System – LK446035
- Power Trax Grip LOK traction system for a Dana 60 rear axle with 35 splines and 4.56 carrier and up (part number LK446035)
- Automatic mechanically actuated locking traction
- Fully machined case with 12 ring gear bolts
- Use 80W-90 GL-5 petroleum gear oil; no friction modifiers
SKU: PTXLK446035 -
Differentials
Power Trax Dana 35 27 Spline 3.54 Carrier and Up Grip PRO Traction System – GT443527
- Power Trax Grip PRO traction system for a Dana 35 rear axle with 27 splines and 3.54 carrier and up (part number GT443527)
- Progressive, throttle-controlled traction from 3×2 spiral gears
- Fully assembled; no friction plates or friction modifier
- Use 80W-90 GL-5 petroleum gear oil, not friction modifiers
SKU: PTXGT443527 -
-
Differential Covers
Poison Spyder Dana 44 Bombshell Differential Cover – 42-11-044-PC
- Dana 44 differential cover from Poison Spyder Customs (part number 42-11-044-PC)
- Cast nodular iron cover with recessed bolt pockets and a ramped profile
- Up to 1 inch thick around the bolt ring, 7/16 to 1/2 inch elsewhere, per the manufacturer
- Black powder coat
- Fits Dana 44 front and rear axles
SKU: PSC42-11-044-PC -
Differentials
Ox Locker Dana 35 27 Spline 3.55 Up Air Selectable Locker – D35-355-27-AIR
- Air selectable locker for a Dana 35 rear axle with 27 splines and 3.55 and up gears (part number OXLD35-355-27-AIR)
- Open for street driving, full spool when engaged
- Forged cover with an integral air cylinder
- External air source required and not included
SKU: OXLD35-355-27-AIR
What belongs in this category
These are the parts that live inside and around the axle housing. Ring and pinion gear sets and installation kits set the final drive ratio. Differentials, including limited-slip and locking units, control how torque is split between the wheels. Axle upgrade kits, axle housing parts, differential covers, ball joints and locking hub spindle nuts round out the group.
The sample listings mention axles such as the Dana 44, Dana 70, Chrysler 8.25 inch and Ford 9.75 inch, so identifying your axle model is the first step.
Choosing a ratio and a differential
Gear ratio should follow tire size and how the vehicle is used. Larger tires effectively raise the overall gearing, which makes the engine work harder and can hurt acceleration and towing. Regearing to a numerically higher ratio restores some of that lost performance. Front and rear ratios must match on a four-wheel-drive vehicle.
- An open differential is the stock choice and offers smooth street manners.
- A limited-slip unit shifts torque toward the wheel with traction while keeping some road manners.
- A locker forces both wheels to turn together for maximum traction on the trail, with some trade-offs in tire wear and handling on pavement.
What to verify before ordering
- Axle model, spline count, bolt pattern and carrier style, because parts differ even within one axle family.
- Tooth count and ratio of the existing gears, which determine whether you need a new matched set.
- Whether a kit includes bearings, shims, seals and hardware or only the gears.
- Front or rear position and side, as parts are often not interchangeable.
Installation notes
Setting up ring and pinion gears requires measuring pinion depth, backlash and bearing preload with the right tools. Mistakes cause noise and premature failure, so many owners leave this job to an experienced drivetrain shop. Ball joints, seals and axle shafts are more approachable but still need proper torque values and clean, correctly lubricated assemblies.
Replace gear oil after installation, follow the break-in procedure from the gear maker, and confirm fitment for your exact year, make and model against the manufacturer's specifications.
Further checks and care
Common mistakes to avoid
Mixing gear sets is a frequent error, since a ring gear and pinion are lapped and matched as a pair. Reusing old bearing races, skipping new shims or ignoring carrier spread can undo an otherwise good build. Another mistake is regearing only one axle. Before you start, gather the correct crush sleeve or shims, thread locker, gear marking compound and the specified gear oil, and keep the work area clean, since grit inside a differential shortens its life.
Measuring and confirming your axle
Beyond the ID tag, confirm the number of ring gear bolts, the carrier bearing style, the axle spline count and the housing width before ordering anything. Record the existing ratio from the tooth counts on the ring gear and pinion, or by counting driveshaft turns for one full wheel rotation. Photos of the cover shape and the axle tube diameter help when comparing against the listing. If a product mentions a specific vehicle platform, confirm it matches yours before proceeding.
Materials, construction and maintenance
Gear sets are usually made from forged alloy steel that is heat treated, and quality depends on tooth pattern accuracy and finishing. Ball joints and bearings rely on correct grease and sealing. After the first few hundred miles of use, change the gear oil to remove break-in metal, then follow the maker's interval. Check axle seals and vent hoses periodically, since a plugged vent can push fluid past seals and contaminate brakes.
Popular Performance Axle Components brands
- G2 Axle and Gear (297)
- Dana Spicer (64)
- Moog (59)
- Crown Automotive (34)
- ARB 4x4 Accessories (33)
- Trail Gear (27)
- Alloy USA (22)
- Eaton (16)
- Motive Gear (15)
- Mag-Hytec (12)
- Omix-Ada (10)
- Dynatrac (9)
Shop Performance Axle Components by type
- Ring and Pinion Installation Kits (216)
- Differential Covers (99)
- Axle Ball Joints (94)
- Axle Upgrade Kits (49)
- Differentials (40)
- Axle Housing (24)
- Hub Gears And Drive Flanges (16)
- Axle King Pin Parts (14)
- Differential Air System Line Fitting (10)
- Differential Air System Line (3)
- Differential Housing (3)
- Carrier Cross Shafts (3)
- Locking Hub Service Kits (1)
- Locking Hub O-Ring (1)
Performance Axle Components FAQ
How do I know which axle I have?
Look for a tag or ID number on the housing, check the cover shape and bolt count, and consult the vehicle's build information. Measuring the ring gear diameter can confirm it. Verify before ordering gears, because many axles look alike.
Do I have to change both front and rear gears together?
On a part-time or full-time four-wheel-drive vehicle, yes. Front and rear ratios must match so the axles turn at the same relative speed, or the driveline can bind and wear out quickly.
Can I install a ring and pinion myself?
It is possible with a dial indicator, torque wrench and the right bearing tools, but correct setup takes experience. Incorrect pinion depth or backlash causes noise and failures, so a professional drivetrain installation is often the safer route.










