Select your vehicle

Moog Suspension Ball Joint – K100314

Moog

Shop Ram 2500 Axle Ball Joints on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front upper ball joint, press-in type, part MOGK100314
  • Fits Dodge Ram 1500, 2500 and 3500 pickups
  • Ram 2500 and 3500 listed through 2017
  • Greasable socket and hardened ball stud

Description

Overview

The Moog K100314 is a press-in front upper ball joint, part number MOGK100314, for Dodge and Ram full-size pickups. It fits the 2006–2008 Dodge Ram 1500, the 2003–2010 Dodge Ram 2500 and 3500, and the 2011–2017 Ram 2500 and 3500.

The joint is greasable and has a hardened ball stud, a dust boot with an encapsulated Belleville washer and a forged housing with more material in key areas. It is designed for a press-in installation.

Key features

  • Press-in type for the front upper position
  • Hardened ball stud made of materials Moog rates as OE equivalent or better
  • Patent-pending dust boot with an encapsulated Belleville washer
  • Powdered metal gusher bearing that delivers grease to the stud
  • Forged housing with up to 52% more material in key areas
  • Greasable socket that flushes contaminants with new lubricant

Press-in installation basics

A press-in joint is seated into the upper knuckle bore under load, so the job needs a press or the correct installation tools. Pressing it in square matters, because a joint seated at an angle can bind and wear early. Clean the bore thoroughly and check it for scoring before pressing, since a rough bore can pull the new joint out of position.

Once the joint is seated, the greasable socket can be serviced through the fitting. Fill it with fresh lubricant, then recheck the boot for tears. A wheel alignment after the work restores correct caster and toe, which protects the new joint and the tires.

  • Use a press or tools made for this joint type
  • Check the knuckle bore for scoring before pressing
  • Grease the socket once the joint is fully seated

Specifications

Brand Moog
Part number MOGK100314
Position Front upper
Joint type Press-in
Lubeable Yes
Housing Forged, with up to 52% more material in key areas

Vehicle fitment

It fits the 2006–2008 Dodge Ram 1500, the 2003–2010 Dodge Ram 2500 and 3500, and the 2011–2017 Ram 2500 and 3500, across the trim versions named for those years.

Ram 1500 years after 2008 and Ram 2500 and 3500 years from 2018 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the joint is press-in, it needs a press or the correct installation tools. Once seated, the greasable socket can be serviced through the fitting.

What’s included

One Moog front upper ball joint, part MOGK100314.

Fitment

VehicleYearsTrims
Dodge Ram 15002006–2008Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4
Dodge Ram 25002003–2010Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4
Dodge Ram 35002003–2010Laramie, SLT, ST, SXT, Sport, TRX4
Ram 25002011–2017Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman
Ram 35002011–2017Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the K100314 fit a 2015 Ram 2500?

Yes. The Ram 2500 fits model years 2011 to 2017, so a 2015 model is covered. Several trims are included, among them the Big Horn, Laramie, Power Wagon and Tradesman versions, and the joint is press-in.

Does the K100314 fit a 2019 Ram 3500?

No. The Ram 3500 fits model years 2011 to 2017, so a 2019 model falls outside that range. Confirm fit for your vehicle's year, model and trim before ordering.

Is the K100314 bolt-on or press-in?

Press-in. It must be pressed into the upper knuckle, so installation needs a press or the correct tools. The greasable socket can be serviced through the fitting once it is seated.

Can I reuse the old upper ball joint if the boot is torn?

A torn boot lets dirt and water into the socket, which speeds up wear. Replacing the joint is the usual choice when the boot is damaged, because the socket is hard to clean and grease properly once contaminated.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 2500 Axle Ball Joints on Amazon