Select your vehicle
-13%

Moog Front Upper Ball Joint – K500316

Moog

$37.78In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 8:10 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front upper ball joint for 4WD trucks, part MOGK500316
  • Press-in type with a greasable socket
  • Fits Dodge Ram 1500, 2500 and 3500 and Ram 2500 and 3500
  • Includes grease fittings, castle nut, cotter pin and hardware

Description

Overview

The K500316 is a press-in front upper ball joint, part number MOGK500316, for four-wheel-drive Dodge and Ram pickups. It fits the 2006–2008 Dodge Ram 1500, the 2003–2010 Dodge Ram 2500 and 3500, and the 2011–2018 Ram 2500 and 3500.

It is for 4WD applications, so confirm the drive type before ordering. Grease fittings, a castle nut, a cotter pin and hardware come with the joint.

Key features

  • Front upper joint for 4WD applications
  • Press-in type with a greasable socket
  • Hardened ball stud made of materials Moog rates as OE equivalent or better
  • Forged housing with up to 52% more material in key areas
  • Pre-tapped grease fitting hole and a larger grease reservoir
  • Includes grease fittings, castle nut, cotter pin and hardware

Four-wheel-drive front suspension basics

Four-wheel-drive front axles add steering and drive components near the knuckle, so the upper joint must match the drive setup. Check the old joint and the axle type before ordering, since a joint for a two-wheel-drive truck does not suit a 4WD front end. A worn upper joint on a 4WD truck often shows up as shimmy, play at the top of the tire, or uneven front tread wear.

Because the joint is press-in, plan for the right tools and a clean knuckle bore. Grease the new joint once it is seated, and keep the castle nut and cotter pin in good condition when reinstalling. Replace worn hardware rather than reusing corroded pieces.

  • Confirm 4WD drive type before ordering
  • Clean the knuckle bore
  • Use new cotter pin and castle hardware
  • Inspect the lower joint and tie rods

Specifications

Brand Moog
Part number MOGK500316
Position Front upper
Drive type Four-wheel drive
Joint type Press-in
Included hardware Grease fittings, castle nut, cotter pin and hardware

Vehicle fitment

It fits the 2006–2008 Dodge Ram 1500, the 2003–2010 Dodge Ram 2500 and 3500, and the 2011–2018 Ram 2500 and 3500, across the trim versions covered for each.

Ram 1500 years after 2008 and Ram 3500 years before 2011 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

The joint is press-in, so it needs a press or the correct installation tools. The grease fittings can be used once the joint is in place.

What’s included

One front upper ball joint with grease fittings, castle nut, cotter pin and hardware.

Fitment

VehicleYearsTrims
Dodge Ram 15002006–2008Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4
Dodge Ram 25002003–2010Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4
Ram 25002011–2018Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman
Ram 35002011–2018Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the K500316 include the castle nut and cotter pin?

Yes. Grease fittings, a castle nut, a cotter pin and hardware come with the upper joint, so the securing parts are included.

Does the K500316 fit a 2WD Ram 2500?

No. It is for 4WD models, so a two-wheel-drive Ram 2500 is not covered. Check the drive type on your truck before ordering this joint.

Does the K500316 fit a 2015 Ram 2500?

Yes, for the 2011 to 2018 Ram 2500 models on Moog's list. Confirm your vehicle's year, model and trim before ordering, and confirm the 4WD configuration.

Should the lower ball joint be checked when replacing an upper one?

Yes. Both joints carry the load at the knuckle, so a worn lower joint can strain a new upper one. Check for play in both joints, and replace any worn joints during the same job.

Why does the castle nut matter on a press-in joint?

The castle nut and cotter pin hold the stud in place. A loose or improperly secured nut can allow movement that damages the joint. Install the nut to the torque for your vehicle and secure it with a new cotter pin.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon