Overview
The K100115 is a bolt-on front upper ball joint, part number MOGK100115, for the Ford F-250 and F-350 Super Duty. It fits the 2007–2010 F-250 Super Duty and the 2007–2010 F-350 Super Duty in the trim versions covered for each truck.
It bolts to the knuckle and has a hardened ball stud, a dust boot with an encapsulated Belleville washer, and a forged housing. The greasable socket allows new lubricant to flush contaminants out.
Key features
- Bolt-on design for the front upper position
- Hardened ball stud made of materials Moog rates as OE equivalent or better
- Patent-pending dust boot with an encapsulated Belleville washer
- Powdered metal gusher bearing that moves grease to the stud
- Pre-tapped grease fitting hole and a larger grease reservoir
- Forged housing with up to 52% more material in key areas
Greasing and service intervals
A greasable upper joint needs fresh grease to push out water and road grit that would otherwise speed wear. Grease the fitting at routine service, and sooner if the truck is driven in mud, sand or deep water. Adding grease does not repair worn parts, so inspect the joint when greasing it.
Super Duty trucks carry heavy loads and tow often, so the front suspension sees steady stress. Pay attention to the boot, which keeps grit away from the ball stud. If the boot is split, grease usually leaks out and dirt gets in, and replacing the joint is the usual fix.
- Grease after water or mud use
- Inspect the boot at each oil change
- Replace a split boot promptly
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK100115 |
| Position | Front upper |
| Joint type | Bolt-on |
| Lubeable | Yes |
| Housing | Forged, with up to 52% more material in key areas |
Vehicle fitment
It fits the 2007–2010 Ford F-250 Super Duty in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trim, and the 2007–2010 Ford F-350 Super Duty in the same trim versions.
Ford F-250 and F-350 models from other years, and the F-150, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a bolt-on joint, so the job is removing the existing fasteners and mounting the new one to the upper knuckle. Check that the truck is one of the 2007 to 2010 Super Duty models before starting.
What’s included
One Moog front upper ball joint, part MOGK100115.










