Overview
The Moog K80008 is a press-in front upper ball joint, part number MOGK80008, for the Ford Explorer, Lincoln Aviator and Mercury Mountaineer. It fits the 2002–2005 Ford Explorer, the 2003–2005 Lincoln Aviator and the 2002–2005 Mercury Mountaineer.
The joint is greasable, has a hardened ball stud and uses a forged housing with more material in key areas.
Key features
- Press-in type for the front upper position
- Greasable socket for regular maintenance
- Hardened ball stud for higher loads
- Forged housing with up to 52% more material in key areas
- Construction and design validated by Moog engineers
- It is designed for a broad range of foreign and domestic applications.
Spotting a worn upper joint
The upper ball joint carries the weight of the front wheel and lets the steering knuckle pivot as the wheel turns and the suspension moves. A worn upper joint often shows up as clunking over bumps, looseness at the top of the wheel or uneven tire wear on the inner edge of the tire. Checking for play before replacing is worthwhile, since the lower joint and control arm bushings are often inspected at the same time.
When replacing a press-in joint, the knuckle bore has to be clean and undamaged so the new joint seats square. A press or proper tools are the safe way to seat it. Replacing both sides together keeps the wheels matched, and a wheel alignment should follow any ball joint work.
- Inspect the dust boot for tears before installing
- Clean the knuckle bore before pressing in the joint
- Check the lower joint for play at the same visit
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK80008 |
| Position | Front upper |
| Joint type | Press-in |
| Lubeable | Yes |
| Housing | Forged, with up to 52% more material in key areas |
Vehicle fitment
It fits the 2002–2005 Ford Explorer (Eddie Bauer, Limited, NBX, Postal, XLS and XLT), the 2003–2005 Lincoln Aviator (Base), and the 2002–2005 Mercury Mountaineer (Base, Luxury and Premier).
Ford Explorer Sport Trac and Explorer years after 2005 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
As a press-in joint, it must be pressed into the knuckle, so a press or the correct tools are needed. Grease the joint through the fitting after installation.
What’s included
One Moog front upper ball joint, part MOGK80008.










