Overview
The Moog K100071 is a bolt-on front upper ball joint, part number MOGK100071, for Jeep SUVs. It fits the 2006–2010 Jeep Commander (XK) and the 2005–2010 Jeep Grand Cherokee (WK) in the versions named for each model.
Because it bolts to the knuckle, it is a direct replacement type for these two models without a press. It has a hardened ball stud, a dust boot with an encapsulated Belleville washer and a forged housing, and the joint is marked lubeable.
Key features
- Bolt-on design that mounts to the upper knuckle
- Hardened ball stud for higher loads
- Patent-pending dust boot with an encapsulated Belleville washer
- Powdered metal gusher bearing that moves grease to the stud
- Larger grease reservoir and a pre-tapped grease fitting hole
- Forged housing with up to 52% more material in key areas
Greasing and boot care
A bolt-on upper joint depends on its boot. The dust boot keeps grit out of the stud, and once it splits, the remaining grease is quickly contaminated. Look at the boot each time the wheels are off, and feel for dry rubber or a crack along the seam.
Greasing works well only when the fitting is accessible and the socket has room to take fresh lubricant. Pump until fresh grease appears at the boot edge, then wipe away the excess. On Jeeps that see mud or water, a regular grease schedule helps the joint shed contaminants rather than hold them.
Bolt-on joints are usually changed as a single unit with fresh fasteners, and new hardware is worth buying rather than reusing old. Check the lower joint and the steering linkage at the same time, since a worn upper joint often shows up alongside them. Confirm the new joint’s position before tightening.
- Grease the fitting until fresh grease shows at the boot
- Inspect the boot each time the wheels come off
- Use fresh fasteners at installation
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK100071 |
| Position | Front upper |
| Joint type | Bolt-on |
| Lubeable | Yes |
| Housing | Forged, with up to 52% more material in key areas |
Vehicle fitment
It fits the 2006–2010 Jeep Commander (XK) in 65th Anniversary Edition, Base, Limited, Overland and Sport versions, and the 2005–2010 Jeep Grand Cherokee (WK) in Laredo, Limited, Overland and SRT8 versions. Jeep Grand Cherokee models before 2005 and after 2010, and the Commander before 2006, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Jeep Grand Cherokee models before 2005 and after 2010, and the Commander before 2006, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The joint bolts to the upper knuckle, so the work is removing the old fasteners and mounting the new joint. Confirm the upper position on your vehicle before starting.
What’s included
One Moog front upper ball joint, part MOGK100071.









