Overview
The Moog K80028 is a press-in front upper ball joint, part number MOGK80028, for rear-wheel-drive Ford trucks and SUVs. It fits the 2000–2005 Ford Excursion, the 1999 Ford F-250, and the 1999–2019 F-250 and F-350 Super Duty.
The joint is for rear-wheel-drive models only, so four-wheel-drive versions of these trucks do not fit. It has a hardened ball stud, a dust boot and a forged housing, and the greasable socket accepts new lubricant through a pre-tapped fitting hole.
Key features
- Rear-wheel-drive trucks only
- Press-in installation into the knuckle
- Hardened ball stud made of materials Moog rates as OE equivalent or better
- Patent-pending dust boot with an encapsulated Belleville washer
- Larger grease reservoir and a pre-tapped grease fitting hole
- Forged housing with up to 52% more material in key areas
Rear-wheel-drive service
On a rear-wheel-drive truck the front axle is not driven, so the upper joint works mainly with steering and suspension loads rather than driveline torque. Heavier trucks and towing put more load on every joint, which makes regular inspection a sensible habit. Look for play at the stud, a split boot and any grease that has been pushed out of the seal.
Because the joint is greasable, a periodic greasing schedule helps keep the socket sealed and moving freely. Pump new grease slowly and stop when the boot begins to swell or fresh grease appears at the seal. Upper and lower joints wear at different rates, so inspecting both gives a clearer picture of what the front end needs.
- Confirm the drive type before ordering
- Inspect the boot after wet or muddy driving
- Re-check the steering for play after the first drive
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK80028 |
| Position | Front upper |
| Drive type | Rear-wheel drive |
| Joint type | Press-in |
| Lubeable | Yes |
Vehicle fitment
It fits the 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS and XLT), the 1999 Ford F-250 (Base, Lariat, XL and XLT), the 1999–2019 Ford F-250 Super Duty and the 1999–2019 Ford F-350 Super Duty, in the trims named above.
Four-wheel-drive versions of these trucks, and Ford models outside the years and names above, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because it is a press-in joint, the installer needs a press or the correct tools. Confirm the rear-wheel-drive application before the old joint is removed.
What’s included
One Moog front upper ball joint, part MOGK80028.










