Overview
The Moog K100056 is a press-in front upper ball joint, part number MOGK100056, for four-wheel-drive Dodge Ram trucks and several Jeep models. The Ram fit covers 4-wheel-drive Ram 1500 and 2500 models only.
It fits the 1987–1995 Jeep Wrangler (YJ), the 1997–2006 Wrangler (TJ), the 2004–2006 Wrangler (LJ) and the 2007–2018 Wrangler (JK). It also fits the 1984–2001 Cherokee (XJ), the 1986–1992 Comanche, the 1993–1998 and 1999–2004 Grand Cherokee (ZJ and WJ), and the 1984–1990 and 1993 Wagoneer and Grand Wagoneer (SJ).
Key features
- Press-in installation into the upper joint seat
- Greasable joint with a pre-tapped grease fitting hole
- Hardened ball stud, made of materials Moog rates as OE equivalent or better
- Powdered metal gusher bearing that delivers grease to the stud
- Forged housing with up to 52% more material in key areas
- Greasable socket that flushes contaminants with new lubricant
Upper joint wear and load
The upper ball joint carries less load than the lower one on many four-wheel-drive trucks, but it still takes the weight of the wheel and steering forces at speed. On a Jeep that sees trail use, the upper boot and stud collect grit quickly. A worn upper joint can cause shimmy, a loose steering feel and uneven tread on the top edge of the tire.
Lift and tire size change the angles through the upper joint, so a lifted truck can load it harder. Check the joint for play before fitting larger tires, and recheck the boot after each run through mud or water. Greasing the fitting at regular intervals flushes contaminants out.
Press-in replacements need the correct tool and a clean seat in the upper arm. When both upper joints are worn, replacing them together keeps the wheels matched, and an alignment afterward sets caster and camber. Keep the old joint for comparing the stud and seat before buying a second one.
- Check the grease fitting before trail trips
- Inspect the boot after mud or water runs
- Replace both upper joints together when both are worn
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK100056 |
| Position | Front upper |
| Joint type | Press-in |
| Lubeable | Yes |
| Housing | Forged, with up to 52% more material in key areas |
Vehicle fitment
It fits the 1994–2001 and 1994–1996 Dodge Ram 1500 and 2500 models, 4-wheel-drive only. It also fits the Jeep models in the ranges above, including the 1984–2001 Cherokee (XJ) and the 2007–2018 Wrangler (JK). Jeep Grand Cherokee years outside those ranges, and Wrangler JL and JT models, are not covered.
Jeep Grand Cherokee years outside those listed, and Wrangler JL and JT models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a press-in joint, so a press or the correct installation tools are needed. Confirm 4-wheel-drive status on Ram models first, since fitment is restricted to those trucks.
What’s included
One Moog front upper ball joint, part MOGK100056.










