Select your vehicle

Moog Front Upper Ball Joint – K90663

Moog

$29.10In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 8:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front upper ball joint, press-in type, part MOGK90663
  • Fits 1998–2004 Nissan Frontier
  • Also fits 2000–2004 Nissan Xterra
  • Greasable with a forged housing and hardened stud

Description

Overview

The Moog K90663 is a press-in front upper ball joint, part number MOGK90663, for two Nissan trucks. It fits the 1998–2004 Nissan Frontier and the 2000–2004 Nissan Xterra.

The joint is greasable and has a hardened ball stud, a dust boot with an encapsulated Belleville washer and a forged housing with more material in key areas. The greasable socket lets new lubricant push out contaminants. It is for the front upper position on both trucks.

Key features

  • Press-in installation into the upper knuckle
  • Hardened ball stud made of materials Moog rates as OE equivalent or better
  • Dust boot with an encapsulated Belleville washer
  • Powdered metal gusher bearing that moves grease to the stud
  • Pre-tapped grease fitting hole and a larger grease reservoir
  • Forged housing with up to 52% more material in key areas

Frontier and Xterra upkeep

The Frontier and Xterra both use front upper joints that work through a steering knuckle, so a worn joint shows up as front-end clunks, steering play and uneven wear on the front tires. Trail and gravel driving can speed up wear, and a dust boot that has cracked or been torn should be replaced before dirt enters the joint. Keeping the grease fresh through the fitting is the simplest way to extend joint life.

Installing a press-in joint is more involved than a bolt-on part. Use a press with the correct adapters rather than hammering the joint into place, which can damage the bore. Once the joint is seated, grease it through the fitting and have the front alignment checked.

  • Use a press with adapters rather than a hammer
  • Inspect the lower joint at the same time
  • Grease the joint after the work is complete

Specifications

Brand Moog
Part number MOGK90663
Position Front upper
Joint type Press-in
Lubeable Yes
Housing Forged, with up to 52% more material in key areas

Vehicle fitment

It fits the 1998–2004 Nissan Frontier (Base, SC, SE, SVE and XE) and the 2000–2004 Nissan Xterra (SE and XE).

Nissan Frontier and Xterra models from other years, and Nissan Pathfinder and Armada models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The joint is press-in, so it needs a press or the correct installation tools. Grease the joint after it is seated, using the fitting provided.

What’s included

One Moog front upper ball joint, part MOGK90663.

Fitment

VehicleYearsTrims
Nissan Frontier1998–2004Base, SC, SE, SVE, XE
Nissan Xterra2000–2004SE, XE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the K90663 fit a 2003 Nissan Frontier?

Yes. The Frontier fits 1998 to 2004 models, so a 2003 model is covered. It is available in the Base, SC, SE, SVE and XE versions, and it is a press-in type for the upper position.

Does the K90663 fit a 2006 Nissan Xterra?

No. The Xterra entry covers 2000 to 2004, in the SE and XE versions, so a 2006 model falls outside the years covered. Check the year and version on your truck before ordering.

Is the K90663 press-in or bolt-on?

It is press-in. It must be pressed into the upper knuckle with a press or the correct installation tools, and it is greasable through the fitting once seated.

What tools do I need for a press-in ball joint?

A shop press with the correct adapters is the usual choice, and a ball joint press kit can also work for the job. Avoid striking the joint with a hammer, since that can damage the housing and the bore. Plan for an alignment after the work is complete.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon