Overview
The K500018 is a press-in front upper ball joint, part number MOGK500018. It fits the 2010–2019 Lexus GX460, the 2003–2009 Lexus GX470, the 2003–2019 Toyota 4Runner, the 2007–2014 Toyota FJ Cruiser, the 2008–2019 Toyota Sequoia and the 2007–2019 Toyota Tundra.
The upper joint is at the top of the knuckle and works with the lower joint to let the wheel turn. This K500018 uses a hardened ball stud, a dust boot and a forged housing, and the greasable socket lets new grease be added through the fitting.
Key features
- Press-in installation into the knuckle
- Greasable socket with a pre-tapped grease fitting hole
- Hardened ball stud made of materials Moog says are OE equivalent or better
- Patent-pending dust boot with an encapsulated Belleville washer
- Powdered metal gusher bearing that moves grease to the stud
- Forged housing with up to 52% more material in key areas
Choosing a press-in upper joint
A press-in upper joint is seated in the knuckle with a press or the correct installation tools, so the fit depends on a clean, undamaged bore. Before ordering, confirm the joint type, the vehicle year and the trim, and examine the knuckle for cracks or wear. Replacing a worn joint with a sound new one usually restores steering feel and reduces tire wear.
Press-in joints are often replaced alongside the lower joint and tie rod ends on the same truck. Greasing the new joint through its fitting, checking the boot at each service, and noting the alignment before work begins all help the front end stay in good order over time.
- Clean and inspect the knuckle bore
- Confirm the joint type before ordering
- Replace worn partner joints together
- Note the alignment reading before work
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK500018 |
| Position | Front upper |
| Joint type | Press-in |
| Lubeable | Yes |
| Housing | Forged, with up to 52% more material in key areas |
Vehicle fitment
It fits the 2010–2019 Lexus GX460, the 2003–2009 Lexus GX470, the 2003–2019 Toyota 4Runner, the 2007–2014 Toyota FJ Cruiser, the 2008–2019 Toyota Sequoia and the 2007–2019 Toyota Tundra, in the trim versions covered for each.
Lexus GX models outside 2003 to 2019, and Toyota 4Runner, Sequoia and Tundra years before 2003 or after 2019, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This press-in upper joint needs a press or the correct installation tools to seat it in the knuckle. The grease fitting can be used after the joint is installed.
What’s included
One Moog front upper ball joint, part MOGK500018.










