Select your vehicle
-13%

Moog Suspension Ball Joint – K727

Moog

$125.32In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 16, 2026 7:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front lower ball joint, thread-in type, part MOGK727
  • Fits Dodge D100 through D350 pickups, 1970–1993
  • Also fits Dodge Dakota, Ramcharger and Plymouth Trailduster
  • Hardened ball stud and forged housing

Description

Overview

The Moog K727 is a thread-in front lower ball joint, part number MOGK727, for older Dodge pickups and the Dodge Dakota. It fits the 1970–1979 and 1984–1989 Dodge D100, the 1977–1993 D150, the 1972–1980 D200, the 1981–1993 D250, the 1974–1980 D300 and the 1981–1993 D350.

The joint also covers the 1987–1996 Dodge Dakota, the 1974–1993 Dodge Ramcharger and the 1974–1981 Plymouth Trailduster. It threads into the knuckle rather than being pressed in, and has a hardened ball stud, a dust boot and a greasable socket.

Key features

  • Thread-in type that screws into the knuckle
  • Hardened ball stud made of materials Moog rates as OE equivalent or better
  • Dust boot with an encapsulated Belleville washer
  • Powdered metal gusher bearing that moves grease to the stud
  • Pre-tapped grease fitting hole and a larger grease reservoir
  • Forged housing with up to 52% more material in key areas

Thread-in fitment tips

A thread-in lower joint relies on clean, undamaged threads in the knuckle. Before installing, wire-brush the threads and inspect them for rust or cross-threading. Old, seized joints often damage the threads on removal, so check the knuckle carefully before fitting the new joint and tighten it to the torque given in your service manual.

On older pickups the knuckle, control arm bushings and steering linkage are often as worn as the joint itself. Inspect them while the wheel is off, and replace any loose parts that would let the new joint move. Grease the socket through the fitting after the joint is in place.

  • Clean and inspect the knuckle threads before threading in the joint
  • Check control arm bushings while the wheel is off
  • Use the torque given in your service manual

Specifications

Brand Moog
Part number MOGK727
Position Front lower
Joint type Thread-in
Lubeable Yes
Housing Forged, with up to 52% more material in key areas

Vehicle fitment

It fits the 1970–1979 and 1984–1989 Dodge D100 (Custom, Pickup Base, Warlock and Warlock II), the 1977–1993 Dodge D150 (Base, Li’l Red Express, Miser and S), the 1972–1980 Dodge D200, the 1981–1993 Dodge D250, the 1974–1980 Dodge D300, the 1981–1993 Dodge D350, the 1987–1996 Dodge Dakota, the 1974–1993 Dodge Ramcharger and the 1974–1981 Plymouth Trailduster.

Later Dodge pickups and Ram trucks, and Dodge models from years not named above, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

This thread-in joint is installed by threading it into the knuckle, which is a different method from the press-in and bolt-on joints in this range. Grease the joint through the fitting once it is in place.

What’s included

One Moog front lower ball joint, part MOGK727.

Fitment

VehicleYearsTrims
Dodge D1001970–1979, 1984–1989Custom, Pickup Base, Warlock, Warlock II
Dodge D1501977–1993Base, Li'l Red Express, Miser, S
Dodge D2001972–1980Base, Custom, Pickup Base
Dodge D2501981–1993Base
Dodge D3001974–1980Base, Custom, Pickup Base
Dodge D3501981–1993Base
Dodge Dakota1987–1996Base, LE, S, SE, SLT, Shelby, Sport, WS
Dodge Ramcharger1974–1993Base, Canyon Sport, Royal SE, SE
Plymouth Trailduster1974–1981Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the K727 fit a 1985 Dodge D150?

Yes. The D150 fits 1977 to 1993, so a 1985 model is covered. The Base, Li'l Red Express, Miser and S versions are included, and the joint threads into the knuckle rather than being pressed in.

Is the K727 a press-in joint?

No. It is a thread-in joint, so it installs by threading into the knuckle rather than being pressed in. It also has a hardened ball stud and a greasable socket.

Does the K727 fit a 1995 Dodge Dakota?

Yes. The Dakota fits 1987 to 1996, so a 1995 model is covered. The Base, LE, S, SE, SLT, Shelby, Sport and WS versions are included.

Why does a lower ball joint wear out before the upper one?

The lower joint carries most of the vehicle weight on many trucks, so it usually takes more load. Regular greasing and inspecting the dust boot help the joint last longer.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon