Overview
The Moog K80604 is a press-in front upper ball joint, part number MOGK80604, for two Jeep SUVs. It fits the 2006–2007 Jeep Commander (XK) and the 2005–2010 Jeep Grand Cherokee (WK), in the versions named below.
The joint has a hardened ball stud and a dust boot with an encapsulated Belleville washer, and the greasable socket allows new lubricant to flush contaminants away. It is a press-in design, so the installation needs a press or the correct tools.
Key features
- Press-in installation into the upper knuckle
- Greasable socket with a pre-tapped grease fitting hole
- Hardened ball stud for higher loads
- Dust boot with an encapsulated Belleville washer
- Powdered metal gusher bearing design for reduced friction
- Forged housing with up to 52% more material in key areas
Jeep upper joint care
On these Jeep SUVs the front upper ball joint sits at the top of the steering knuckle and carries steering and suspension movement every time the wheel turns or the suspension travels. Off-road use, road salt and deep water can all reach the joint through a damaged boot, so the boot is worth a close look at each oil change or tire rotation.
Pressing a new joint into the knuckle calls for a clean bore and square seating. After installation, grease the joint through the fitting until it is fully charged, then wipe away excess. Finish by checking the steering for smooth movement and having the alignment set to the service specification for your vehicle.
- Look for cracks or tears in the boot
- Use a ball joint grease suited to the joint
- Check the castle nut and cotter pin after installation
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGK80604 |
| Position | Front upper |
| Joint type | Press-in |
| Lubeable | Yes |
| Housing | Forged, with up to 52% more material in key areas |
Vehicle fitment
It fits the 2006–2007 Jeep Commander (XK), including the 65th Anniversary Edition, Base, Limited, Overland and Sport versions, and the 2005–2010 Jeep Grand Cherokee (WK), including the Laredo, Limited, Overland and SRT8 versions.
Commander years 2008 to 2010 are not on this list, which names only 2006 and 2007 for that model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the joint is press-in, plan for a press or the correct installation tools. Grease the joint through the fitting once it is seated.
What’s included
One Moog front upper ball joint, part MOGK80604.










