Overview
The Smittybilt GEN2WINPAK4 is a winch PAK built around the X2O 10 GEN2 Comp Series winch, rated for 10000 lb and fitted with synthetic rope. The PAK adds a recovery accessory kit and a winch plate for the Jeep Wrangler JK, made for the 2007 to 2011 model years.
The X2O Comp Series keeps the features of the original X2O line, including a sealed 6.6 hp series-wound motor, a three-stage planetary gear system and a waterproof 500 amp solenoid pack. The Comp Series adds synthetic winch rope, which is lighter than steel cable.
The winch carries the Smittybilt Lifetime Warranty.
Key features
- 10000 lb line pull rating
- Synthetic rope line type with a hawse fairlead
- Remote control with a 12 ft. lead
- Sealed 6.6 hp series-wound motor and three-stage planetary gears
- Accessory kit with heavy-duty gloves, recovery chain, tow straps, D-ring and snatch block
Using synthetic rope
Synthetic rope is lighter and easier to handle than steel cable, but it needs a little more care. It can be cut or abraded by sharp edges, so keep the rope off rocks and rough bumper edges, and spool it evenly under tension.
Synthetic rope can be used with a hawse fairlead, which guides the line without the roller that a steel cable needs. Check the rope regularly for fraying, and keep it dry and clean when stored. Use the accessory kit’s chain and straps with care, since shackles and rings should match the load.
- Protect rope from sharp edges
- Spool the line evenly under tension
- Inspect for fuzzing or cut strands
- Store the rope dry and out of direct sun
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | GEN2WINPAK4 |
| Line pull rating | 10000 lb |
| Line type | Synthetic rope |
| Fairlead | Hawse |
| Remote control | 12 ft. lead |
| Motor | 6.6 hp, series wound, sealed |
| Winch plate thickness | 3/8 in., powder coated |
Vehicle fitment
The Smittybilt Winch Plate is made for the 2007 to 2011 Jeep Wrangler JK. The plate is powder coated for corrosion resistance and is made from 3/8 inch plate for a solid mount. It works with the factory bumper but needs a small modification to the frame cover for installation.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The winch plate works with the factory bumper but requires a small modification to the frame cover before it can be installed. Check the frame cover fit before ordering, and keep the synthetic rope away from sharp edges during installation.
What’s included
The accessory kit includes heavy-duty gloves, a recovery chain, tow straps, a D-ring and a snatch block. The 3/8 in. winch plate is made for the 2007 to 2011 Wrangler JK. Check the contents against your installation before starting.









