Overview
The Smittybilt D0989CC-SS is a polished stainless nerf step set for the Dodge Ram 1500. It fits the 2009 and 2010 Ram 1500 in Laramie, SLT, ST, Sport, TRX and TRX4 versions, and the 2011 to 2016 Ram 1500 in Big Horn, Express, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Rebel, SLT, ST, Special Service, Sport and Tradesman versions.
The steps are a 4 or 6 step drop-down design on a 3-inch main tube, with cleated step plates that give a firm footing. The unit is rated for loads up to 445 pounds, and it helps protect the rocker panels from contact.
The steps are a one-piece unit that bolts to the frame with no bracket assembly. Installation is direct, which suits an owner fitting them at home.
Key features
- Polished stainless steel finish
- Wheel-to-wheel length
- Four or six step drop-down design
- Three-inch main tube
- Cleated step plates
- Rated for loads up to 445 pounds
- One-piece frame-bolt design
- Helps protect rocker panels
Ram 1500 use and clearance
A nerf step on a Ram 1500 helps with the climb into a taller cab, and it keeps the rocker area clear of rocks and brush on uneven ground. Drop-down designs with wide plates give a more stable footing than a narrow bar, which matters for passengers in dark or wet conditions.
Owners who fit larger tires or a lift should recheck clearance, because the step sits low and can meet tires at full steering lock. Ram trucks also have sensors and body panels near the mounting area, so check that the unit clears them before tightening. Re-torque the bolts after the first few trail runs.
- Recheck tire clearance after lift or tire changes
- Look for contact with sensors and body panels
- Re-torque bolts after early trail use
- Keep plates free of mud for better grip
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | D0989CC-SS |
| Finish | Polished stainless steel |
| Length | Wheel to wheel |
| Main tube | 3 inches |
| Step design | Four or six step drop-down with cleated plates |
| Load rating | Up to 445 pounds |
| Installation | One-piece unit bolts to frame |
Vehicle fitment
This nerf step fits the 2009 to 2010 Dodge Ram 1500 in Laramie, SLT, ST, Sport, TRX and TRX4 versions, and the 2011 to 2016 Ram 1500 in the Big Horn through Tradesman range of versions.
The Ram 2500 and 3500 and the 2017 and later Ram 1500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The nerf step unit.















