Select your vehicle

Smittybilt XRC Rock Sliders (Black) – 76865

Smittybilt

Shop Jeep CJ7 Rock Sliders on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Smittybilt XRC rock sliders in gloss black, part number 76865
  • Fits 1976 to 1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims
  • Formed from 3/16-inch solid plate with a 1.75-inch over-rider tube
  • Bolts up to factory holes; no cutting or drilling required
  • Five-year limited warranty

Description

Overview

The Smittybilt XRC 76865 is a pair of rock sliders for the Jeep CJ7. It fits 1976 to 1986 CJ7 models in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims. Rock sliders protect the rocker panels from rocks and trail hazards, and these are formed to match the shape of the vehicle.

The sliders are made from 3/16-inch solid plate with a 1.75-inch over-rider tube for extra protection along the lower edge. They bolt up to factory holes. The finish is a black powder coat, and the sheen should be confirmed before ordering. The sliders carry a five-year limited warranty.

Key features

  • Formed 3/16-inch solid plate
  • 1.75-inch over-rider tube
  • Bolts up to factory holes
  • No cutting or drilling required, per the specification list
  • Five-year limited warranty

Older CJ7 mounting checks

A CJ7 has been on the trail for decades, so the rocker area may show rust, past repairs or loose factory mounts before any new parts go on. Clean the mounting surfaces and look for thin metal around the holes before tightening anything. Plate sliders work best when the body is sound, because the guard only protects as well as the rocker it is bolted to.

Solid plate is heavy and stiff, which helps it shrug off rock strikes but also moves more load into the mounts. Inspect the bolts after the first trail outings and check the lower over-rider tube for dents or cracks. A powder coat can chip at the edges, so touch up bare steel to limit rust at the seams.

Specifications

Brand Smittybilt
Part number 76865
Type Formed plate guard with tubular standoff
Plate thickness 3/16 inch solid plate
Over-rider tube 1.75 inch
Finish Black powder coat; confirm the sheen before ordering
Installation No cutting or drilling required
Warranty Five-year limited

Vehicle fitment

Smittybilt lists these sliders for the 1976 to 1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims.

Later Jeep models and the CJ5 are not on this list. Confirm your vehicle’s year, model and trim before ordering.

SKU: S/B76865 Categories: ,

Fitment

VehicleYearsTrims
Jeep CJ71976–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Do the Smittybilt 76865 sliders fit a 1980 Jeep CJ7?

Yes. It fits 1976 to 1986 Jeep CJ7 models, including 1980 models in the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims.

Do the 76865 sliders need drilling?

The specification list says no cutting or drilling is required, and the sliders bolt up to factory holes. Check the instructions before installing, especially on an older CJ7.

What is the warranty on the 76865?

A five-year limited warranty applies. The sliders are formed from 3/16-inch solid plate and include a 1.75-inch over-rider tube along the lower edge.

How do I know if the rocker area is too weak for sliders?

Press firmly on the rocker and the floor edge, looking for soft spots, flaking metal or holes. If the factory mounts pull loose or the metal tears, repair the body before fitting any slider, since the guard relies on that structure.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep CJ7 Rock Sliders on Amazon