Select your vehicle

Smittybilt Wheel-to-Wheel Nerf Steps (Black) – T0786CC-TX

Smittybilt

Shop Toyota Tundra Nerf Steps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2020 Toyota Tundra in its 1794 Edition, Limited, Platinum and SR5 versions
  • Black wheel-to-wheel nerf steps on a 3-inch main tube
  • Four or six step drop-down design with cleated step plates
  • One-piece bolt-on unit, rated for up to 445 pounds

Description

Overview

The Smittybilt T0786CC-TX is a black nerf step set for the 2020 Toyota Tundra. It fits the 1794 Edition, Limited, Platinum and SR5 versions of that model year, and the steps run wheel to wheel.

Each step is a four- or six-step drop-down design on a 3-inch main tube, with cleated step plates for footing. The steps suit lifted trucks, help protect the rocker panels, and are rated for loads of up to 445 pounds.

The unit is one piece and bolts to the frame without brackets that need assembling first. The finish is black.

Key features

  • Black finish
  • Wheel-to-wheel length
  • Four or six step drop-down design
  • Three-inch main tube
  • Cleated step plates
  • Rated for up to 445 pounds
  • One-piece frame-bolt design
  • Helps protect rocker panels

Tundra step ownership

Tundra owners who run lifted trucks often find side steps useful for loading gear into the bed and getting into a tall cab. A drop-down step makes the entry manageable, but it also sits closer to rocks and brush than the body does. Consider how often you drive on uneven ground when deciding how low the steps should sit.

Black finishes show mud and dust less than bright metal, but they still need periodic cleaning to prevent grime from building up on the plates. Check the mounting bolts after the first few trips and whenever the truck has been through rough terrain. Keep an eye on the frame contact points so the steps stay tight and quiet.

  • Consider how often you drive rough terrain
  • Clean grime from the step plates
  • Recheck mounting bolts after rough trips

Specifications

Brand Smittybilt
Part number T0786CC-TX
Finish Black
Length Wheel to wheel
Main tube 3 inches
Step design Four or six step drop-down with cleated plates
Load rating Up to 445 pounds
Installation One-piece unit bolts to frame

Vehicle fitment

It fits the 2020 Toyota Tundra in its 1794 Edition, Limited, Platinum and SR5 versions.

The 2007 to 2019 Tundra and the 2000 to 2006 Tundra are not on this 2020 list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The nerf step unit. No quantity is stated.

SKU: S/BT0786CC-TX Categories: , ,

Fitment

VehicleYearsTrims
Toyota Tundra20201794 Edition, Limited, Platinum, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the T0786CC-TX fit a 2020 Toyota Tundra Limited?

Yes. Limited is one of the listed 2020 Tundra versions, along with 1794 Edition, Platinum and SR5. Check the model year and version on your truck against the list before you order.

Does it fit a 2019 Tundra?

No. These steps fit the 2020 model year only, so a 2019 Tundra is not covered. Confirm the year, model and trim match your truck before ordering.

Is the finish black?

The finish is black, and the steps are one-piece units that bolt to the frame. They are rated for loads of up to 445 pounds.

Do nerf steps change the approach or departure angle?

Side steps sit low on the frame and can reduce ground clearance near the rocker area, which can matter on steep trails. Compare the lowest point of the steps with your terrain and tire size. Mount them to the frame, not to the body.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tundra Nerf Steps on Amazon