Overview
The Smittybilt F99100CC-SS is a polished stainless nerf step set for Ford Super Duty trucks. It fits the F-250 Super Duty from 1999 to 2016 and the F-350 Super Duty from 1999 to 2015 in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT versions.
The steps use a four- or six-step drop-down design on a 3-inch main tube, with cleated step plates for footing. They are rated for loads of up to 445 pounds, and the company says they protect the rocker panels when the cab is entered and exited.
The unit is a one-piece design that bolts to the frame, so no brackets need to be pre-assembled. The wheel-to-wheel length covers the full distance between the wheels on the listed trucks.
Key features
- Polished stainless steel finish
- Wheel-to-wheel length
- Four or six step drop-down design
- Three-inch main tube
- Cleated step plates
- Load rating up to 445 pounds
- One-piece frame-bolt design
Matching steps to a heavy-duty truck
Super Duty trucks sit tall and have wide cabs, so a nerf step is often the main way to reach the door. The drop height and step width should suit the way you climb in, especially when carrying tools or gear. Check how the step meets the cab’s door sill and the lower body panel, since a too-tight fit can scuff paint.
The heavier frame and towing use make the mounting area more important. Inspect bolts after towing, and look for rust near the bracket where the step attaches. If the step is bent or the plate is loose, repair it before adding load. Keep the frame clean so moisture does not collect at the attachment point.
- Check door swing clearance with the step fitted
- Inspect bolts after towing or heavy loads
- Look for rust where the step meets the frame
- Keep mounting surfaces clean and dry
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | F99100CC-SS |
| Finish | Polished stainless steel |
| Length | Wheel to wheel |
| Main tube | 3 inches |
| Step design | Four or six step drop-down with cleated plates |
| Load rating | Up to 445 pounds |
| Installation | One-piece unit bolts to frame |
Vehicle fitment
It fits the 1999 to 2016 Ford F-250 Super Duty and the 1999 to 2015 F-350 Super Duty in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT versions. The F-150 and any F-250 or F-350 years outside those ranges are not covered. Make sure your year, model and trim are covered before ordering.
The F-150 and the F-250 and F-350 years outside those ranges are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One nerf step unit. Review what arrives in the box against your installation plan first.










